Topic: That brick wall still. (Read 1158 times)

Kes · « **on:** 17 February 2007, 14:31:49 »

A while ago i posted on the hitting a brick wall at 3400rpm but only when engine is up to temp .
I have only changed the can sensor which came to no avail .

Next month its going to a mech mate to do the rocker gaskets oil n breather, ht leads .

Some one spoke about the multi ram valves with a piccy of their rpm cycle .
The front ram I can see opening just afore the brick wall but I can't see the rear one operate at the same time , is it supposed to or does it come at a diff rpm . Even if I pull on the link arm of the valve to open it the car will still not rev past the wall . Could this be a problem if so do I change the whole ram or is their a solenoid somewhere

Marks DTM Calib · « **Reply #1 on:** 17 February 2007, 16:43:31 »

When was the fuel filter last changed?

Kes · « **Reply #2 on:** 17 February 2007, 18:25:22 »

Pass , not since I've owned it 9mths . Worth doing at the same time then .

News:

Author Topic: That brick wall still. (Read 1158 times)

Kes

That brick wall still.

Marks DTM Calib

Re: That brick wall still.

Kes

Re: That brick wall still.