Topic: Cam cover gasket 2.0 Ecotac (Read 1173 times)

omegalyn · « **on:** 23 February 2007, 13:43:10 »

Hi there!

Can anyone please advise, Going to change Cam cover gasket on my 2.0 16v Ecatec, with a new genuine gasket. Should the new gasket come with O rings and black sealent or is that just with the v6 omega's. It's just that when I phoned the Vauxhall garage, the parts man said you just get a gasket and you don't need O rings and sealent .:-/

Any advice as I am picking gasket up after work
Thanks.

Marks DTM Calib · « **Reply #1 on:** 23 February 2007, 15:08:41 »

You need the black sealent and 10 O rings (might be 8, cant recall)

nixoro · « **Reply #2 on:** 23 February 2007, 15:11:11 »

Quote

You need the black sealent and 10 O rings (might be 8, cant recall)

Your Spot on Mark

1 Gasket and 10 O rings are needed, Black sealant is a must, the green snot they supply just isn't upto the job.

omegalyn · « **Reply #3 on:** 23 February 2007, 15:24:28 »

Thanks for reply

Why are Vauxhall only supplying gasket. I asked the man and he did not know what I was talking about. no O ring and no black sealent. just a gasket!!! Might try another Vaux garage.
That is a (8, cant recall) ?

Thanks
omegalyn

Marks DTM Calib · « **Reply #4 on:** 23 February 2007, 15:26:00 »

The part number for the sealent is listed in the V6 cam cover maintenance guide....seem to recall the O rings are the same to....

News:

Author Topic: Cam cover gasket 2.0 Ecotac (Read 1173 times)

omegalyn

Cam cover gasket 2.0 Ecotac

Marks DTM Calib

Re: Cam cover gasket 2.0 Ecotac

nixoro

Re: Cam cover gasket 2.0 Ecotac

omegalyn

Re: Cam cover gasket 2.0 Ecotac

Marks DTM Calib

Re: Cam cover gasket 2.0 Ecotac