Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: [1]   Go Down

Author Topic: Over pressurised expansion tank  (Read 2269 times)

0 Members and 1 Guest are viewing this topic.

andycuk71

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Reading
  • Posts: 113
    • View Profile
Over pressurised expansion tank
« on: 26 June 2007, 17:13:26 »
Hi

Since doing the oil cooler on my 3.0l V6 1997 can not seem to get the coolant system right.

Symptoms:-

Steam coming from expansion cap when closed after 20 mins of driving.
Water in Expansion tank very hot and bubbling like its boiling.
Car is not over heating and driving fine.
Pipes are very hot

Have read various threads and have flushed 4 times water is clear and have run the car up to temp with expansion tank cap off and let water erupt out whilst squeezing pipes to remove any air.

Can anyone offer any advice as at this stage I am thinking its a Head Gasket.
Logged

BrianH

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Bexley,Kent
  • Posts: 67
    • View Profile
Re: Over pressurised expansion tank
« Reply #1 on: 26 June 2007, 18:42:48 »
Did you run it up to temp with heater on max heat to give total circulation of the system mine proved troublesome in getting rid of air completely also did you fit new or test stat whilst stripped down.

Brian
Logged

andycuk71

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Reading
  • Posts: 113
    • View Profile
Re: Over pressurised expansion tank
« Reply #2 on: 26 June 2007, 19:58:59 »
Yes to the heater on full.

No to the termostat
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107002
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Over pressurised expansion tank
« Reply #3 on: 26 June 2007, 20:00:54 »
Is the top hose getting hot before the bottom hose?
Logged
Grumpy old man

andycuk71

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Reading
  • Posts: 113
    • View Profile
Re: Over pressurised expansion tank
« Reply #4 on: 26 June 2007, 20:17:00 »
Will have to check tomorrow what would this indicate?
Logged

Admin

  • Administrator
  • *****
  • Offline Offline
  • 0
  • Posts: 2595
    • View Profile
Re: Over pressurised expansion tank
« Reply #5 on: 26 June 2007, 20:20:10 »
What did you use to remove the horrible gunk from the system?
Logged
The Administrator.

andycuk71

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Reading
  • Posts: 113
    • View Profile
Re: Over pressurised expansion tank
« Reply #6 on: 26 June 2007, 20:45:45 »
Patience and automatic washing powder
Logged

Dazzler

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Haverhill, Suffolk
  • Posts: 4198
  • Drive it like you stole it......
    • View Profile
Re: Over pressurised expansion tank
« Reply #7 on: 26 June 2007, 21:57:58 »
I thought you were cleaning out the cooling system not washing your whites ::)
Logged
Big jobbies now finished.....Now running on LPG

VX1

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Reading, Berkshire
  • Posts: 2056
    • View Profile
Re: Over pressurised expansion tank
« Reply #8 on: 27 June 2007, 10:05:48 »
Andy, Try flushing the system again with rad flush and check the stat to make sure its working properly. If the stat isn't opening/closing then replace it this could be the cause of the problem. Whats proberly happening is that when the coolant is getting hot the stat is opening to allow cold water through thus cooling the water down through the system as well as the fans, if the stat is staying open through out all that is going through is hot water, yes maybe the fans are coming on but ownly cooling down enough to bring the temp down to stop it from boiling over thus still very hot water is bieng permantley pumped around, thats probably why you are getting boiling water in the exspanion tank. Just a theory but I might be wrong, no doubt I will be told if so. And the other thing is DON'T USE WASHING POWDER cause it can block up vital parts for the water to circulate.  ::) ::)
« Last Edit: 27 June 2007, 10:08:18 by vauxhallomega1 »
Logged
Vx Trade club card holder
Halfords trade card holder

Admin

  • Administrator
  • *****
  • Offline Offline
  • 0
  • Posts: 2595
    • View Profile
Re: Over pressurised expansion tank
« Reply #9 on: 27 June 2007, 12:17:48 »
Machine Mart traffic film remover (concentrate) is recommended (credit to Marks DTM ;)) as is Forte oil cooler flush.

I ran 4 seperate lots traffic film remover (and thoroughly flushed after each)  before I was satisfied the cooling system was cleared after oil cooler failure.
Logged
The Administrator.

andycuk71

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Reading
  • Posts: 113
    • View Profile
Re: Over pressurised expansion tank
« Reply #10 on: 29 June 2007, 08:09:09 »
Quote
Is the top hose getting hot before the bottom hose?


No both bottom one is slightly warmer but only just
« Last Edit: 29 June 2007, 08:09:31 by andycuk71 »
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34010
  • Git!
    • View Profile
Re: Over pressurised expansion tank
« Reply #11 on: 29 June 2007, 08:35:01 »
Replace the header tank cap, the oil from the cooler gets into the seal and makes it swell and as a result it doesn't seal properly......the result is torrents of water out of the cap.
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107002
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Over pressurised expansion tank
« Reply #12 on: 29 June 2007, 21:50:48 »
Quote
Quote
Is the top hose getting hot before the bottom hose?


No both bottom one is slightly warmer but only just
Stat not opening?
Logged
Grumpy old man
Pages: [1]   Go Up
« previous next »
 

Page created in 0.017 seconds with 21 queries.