Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: lot of engine work on - but what order?  (Read 1733 times)

0 Members and 1 Guest are viewing this topic.

Tafty

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Liverpool
  • Posts: 587
  • This week I am no longer the owner of a miggy!! :(
    • View Profile
lot of engine work on - but what order?
« on: 04 July 2007, 23:16:53 »
Sooo, have the following to do this weekend and am planning a hefty love in with my car whilst diff is being re-conned.

Need to do the following - but to am I correct to do it in this order? What are peoples thoughts/experiences for ease of job/time - dont want to start and finish a job then start dismantling again after just putting back together.

1. Fuel/Air Filters
2. Breathers
3. Rocker gaskets
4. Spark Plugs
5. Cambelt - ( Oh am also replacing oil pressure switch as it's weeping whilst front end stripped down)

Is this a realistic weekend job?? (that's if it doesn't rain!!!! >:()

Cheers

Lee
Logged

Markie

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Lanarkshire, Scotland
  • Posts: 7762
    • RS4, BMW X5, Range Rover
    • View Profile
    • http://www.facebook.com/pages/Markiescarparts/149306545168993
Re: lot of engine work on - but what order?
« Reply #1 on: 04 July 2007, 23:28:17 »
personally i`d strip it right down to belt and work back from there.

Do belt and tensioners - may as well do water pump when there and build back up via cam covers, breathers and filters last...

Others may differ... and yes A good solid weekend with no significant barriers ( all tools and parts present) and a SWMBO to bring endless supplies of tea should see it done  :y

EDIT - Just read pressure switch not cam belt so ignore line 2.
« Last Edit: 04 July 2007, 23:29:46 by Markiec »
Logged
MarkiesCarParts-Online Now With A New 4000FT Partswarehouse; Stocking Thousands of Vauxhall,Peugeot, Citroen, Renault & Rover NEW Parts - Check us on Ebay MarkiesCarParts-Online. PM me via OOF for discount

sassanach

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • trowbridge
  • Posts: 1161
    • View Profile
Re: lot of engine work on - but what order?
« Reply #2 on: 04 July 2007, 23:40:46 »
are you having the diff reconned at £450 rather than a second hand unit?
Logged

Tafty

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Liverpool
  • Posts: 587
  • This week I am no longer the owner of a miggy!! :(
    • View Profile
Re: lot of engine work on - but what order?
« Reply #3 on: 04 July 2007, 23:43:09 »
Quote
personally i`d strip it right down to belt and work back from there.

Do belt and tensioners - may as well do water pump when there and build back up via cam covers, breathers and filters last...

Others may differ... and yes A good solid weekend with no significant barriers ( all tools and parts present) and a SWMBO to bring endless supplies of tea should see it done  :y

EDIT - Just read pressure switch not cam belt so ignore line 2.

I'm changing the water pump - just forgot to type it in :-X

The wife is away for the weekend with the kids to keep them out my way as the little angels shouldn't be in earshot of the effin and blindin that's most likely going to happen plus she knows she'll be chief tea lady all weekend and she "want's a life too!!!!" was the phrase  ::) ..... so am going to have a decent pile of butties and my finest thermos to hand :D. At least will be able to have my ipod on loud without complaint  :y- really looking forward to this weekend.... though hopefully it'll all go well.

Have been debating doing the crank sensor which is very topical at the mo.... but unsure as yet as to the time it will take and whether it's absolutely necessary and only replace when failed :-/  Don't know.
« Last Edit: 05 July 2007, 07:57:21 by Tafty »
Logged

Tafty

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Liverpool
  • Posts: 587
  • This week I am no longer the owner of a miggy!! :(
    • View Profile
Re: lot of engine work on - but what order?
« Reply #4 on: 04 July 2007, 23:47:08 »
Quote
are you having the diff reconned at £450 rather than a second hand unit?

yes, don't know enough about the diff to do anything with it myself and have been getting quotes for scrappers at around the £150 to £200 mark - and we have a fair few in Liverpool too.  So for peace of mind and the wifes nerves am going down the repair of my existing route.
Logged

sassanach

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • trowbridge
  • Posts: 1161
    • View Profile
Re: lot of engine work on - but what order?
« Reply #5 on: 04 July 2007, 23:50:55 »
got one here you can have for the price of postage,came out of a 3 litre elite at 107,000 miles. i only changed it  because i fitted a lsd.your call.
Logged

sassanach

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • trowbridge
  • Posts: 1161
    • View Profile
Re: lot of engine work on - but what order?
« Reply #6 on: 04 July 2007, 23:53:44 »
going rate in scrappers for lsd is £100
Logged

Tafty

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Liverpool
  • Posts: 587
  • This week I am no longer the owner of a miggy!! :(
    • View Profile
Re: lot of engine work on - but what order?
« Reply #7 on: 04 July 2007, 23:53:56 »
Quote
got one here you can have for the price of postage,came out of a 3 litre elite at 107,000 miles. i only changed it  because i fitted a lsd.your call.

is it the same ratio as a 2.6?

If so would definately take it off your hands. :y
« Last Edit: 04 July 2007, 23:54:40 by Tafty »
Logged

Tafty

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Liverpool
  • Posts: 587
  • This week I am no longer the owner of a miggy!! :(
    • View Profile
Re: lot of engine work on - but what order?
« Reply #8 on: 04 July 2007, 23:58:51 »
Quote
going rate in scrappers for lsd is £100

that's not the price I've been getting up here. >:(
Logged

sassanach

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • trowbridge
  • Posts: 1161
    • View Profile
Re: lot of engine work on - but what order?
« Reply #9 on: 04 July 2007, 23:59:43 »
as i understand it by marks dtm ratio on 3 litre auto is 3.9 to one same as yours. your welcome to it. if you want it let me know and i will find cost out cost of carrier in the morning.ps it only costs £55.00 to ship a pallet from one end of the country to another so i cant see it being any more
Logged

Tafty

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Liverpool
  • Posts: 587
  • This week I am no longer the owner of a miggy!! :(
    • View Profile
Re: lot of engine work on - but what order?
« Reply #10 on: 05 July 2007, 00:02:04 »
Quote
as i understand it by marks dtm ratio on 3 litre auto is 3.9 to one same as yours. your welcome to it. if you want it let me know and i will find cost out cost of carrier in the morning.ps it only costs £55.00 to ship a pallet from one end of the country to another so i cant see it being any more

That would be excellent if you could.

PM me when you have cost. :)

Cheers Sass your a star :y
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.013 seconds with 17 queries.