Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Golfbuddy]

Perhaps one of the Mods' could add the following info to this maintenance guide?

The recommended torque setting for the crank case breather tube is 25 Nm and the gasket part number is 90500571. This is a metal gasket and the bead on the gasket must point upwards to the crankcase ventilation flange.

The part number for the throttle body gasket is 90543950.

Hope this is of help to someone.

[Taxi_Driver]

Perhaps one of the Mods' could add the following info to this maintenance guide?

The recommended torque setting for the crank case breather tube is 25 Nm and the gasket part number is 90500571. This is a metal gasket and the bead on the gasket must point upwards to the crankcase ventilation flange.

The part number for the throttle body gasket is 90543950.

Hope this is of help to someone.

Is it?  :-/

The one i have here is pn 92067502  :-/

If im thinking of the same gasket......

[Golfbuddy]

Well, the one I'm referring to was a diamond shape, made of metal, black in colour, with a hole in either end and a raised bead as mentioned. The part number was written on the label as supplied by the Vx dealer.

Now, I could be wrong and if there is any doubt then of course leave the number out. The dealer was able to give me the part without the part number and to make matters worse, there was no gasket on the car in the first place. I suspect that this had never existed from new.

[TheBoy]

Perhaps one of the Mods' could add the following info to this maintenance guide?

The recommended torque setting for the crank case breather tube is 25 Nm and the gasket part number is 90500571. This is a metal gasket and the bead on the gasket must point upwards to the crankcase ventilation flange.

The part number for the throttle body gasket is 90543950.

Hope this is of help to someone.

send pm to AA - its his guide

[Taxi_Driver]

Well, the one I'm referring to was a diamond shape, made of metal, black in colour, with a hole in either end and a raised bead as mentioned. The part number was written on the label as supplied by the Vx dealer.

Now, I could be wrong and if there is any doubt then of course leave the number out. The dealer was able to give me the part without the part number and to make matters worse, there was no gasket on the car in the first place. I suspect that this had never existed from new.

If its the gasket shown in AA's guide, 4th pic down, top left....then the one i have here is exactly the same.

I would take a piccy of the gasket in its bag showing part no......but camera software is on pc with knackered monitor

[Taxi_Driver]

Did did a bit of searching about....to find out why i have a different part no.....

In a program i dont have i might of found that your p/n is indeed the gasket  

But my p/n doesnt return anything, which suggests my p/n has supersuceeded your p/n

Perhaps someone can confirm this  

[Golfbuddy]

I too would take a picture of said gasket but mine is now on the said flange on the said crank case breather tube. However, if I was to have a copy of the programme that you clearly don't have, how would I search for a part number? :-/

[TheBoy]

Did did a bit of searching about....to find out why i have a different part no.....

In a program i dont have i might of found that your p/n is indeed the gasket  

But my p/n doesnt return anything, which suggests my p/n has supersuceeded your p/n

Perhaps someone can confirm this  

tsk tsk, old version TD?

[Taxi_Driver]

Did did a bit of searching about....to find out why i have a different part no.....

In a program i dont have i might of found that your p/n is indeed the gasket  

But my p/n doesnt return anything, which suggests my p/n has supersuceeded your p/n

Perhaps someone can confirm this  

tsk tsk, old version TD?

ummm.....well not upto date.....

i took your advice on another prog i dont have either......and if i had it its a 2006 version....but its all in bl**dy german......so thats as much use as a chocolate fireguard  

[CaptainZok]

Gosh haven't lots of us not got a lot of programs.  

[Taxi_Driver]

I too would take a picture of said gasket but mine is now on the said flange on the said crank case breather tube. However, if I was to have a copy of the programme that you clearly don't have, how would I search for a part number? :-/

Well you need EPC....but that would be naughty.....and off the top of my head....from what a vx storeman showed me.....you hit the search function once loaded up from the menus at the top and clicky the button to search on p/n....then enter p/n and then clicky on search  

[Taxi_Driver]

Gosh haven't lots of us not got a lot of programs.  

Mines got so few progs i carnt understand how it even boots  

[Golfbuddy]

Good job I don't have that then.

No, I really don't have it.

[Auto Addict]

I've got a stock of them, Part Number shown on packet is 92067502, bought less than 1 month ago.

Same as TD's.

[Taxi_Driver]

I've got a stock of them, Part Number shown on packet is 92067502, bought less than 1 month ago.

Same as TD's.

Hi AA....you going into cleaning breathers business then  

Oh and you last post just disapeared....did you delete it??  :-/