Topic: 2l timing markings (Read 819 times)

prr · « **on:** 18 August 2007, 22:33:51 »

:-/hi to all out there well ive come to fit my new cambelt on my 2l and im a bit lost as to the timing markings on the cams
there are two notches on each cam wheel one with a triangle under it the other is just as stright notch
which on is the one to line up with the cut out on the cam cover back plate as they dont seem to line up when i set the crank pully up with its pointer this is with the old belt still on
i hope this makes sence
its been a long day new wishbones a very stubborn steering idler removed along with some skin new discs and pads on the way and still to do the cam belt
and to top the day its rained all sodding day until i was packing up the tools
great weather
any help is greatful im sure its on here somewhere

omegalyn · « **Reply #1 on:** 18 August 2007, 22:53:11 »

Hi there prr
I cant remember which of the markings I used on the cams to do mine, but only one set will line up with the crankshaft mark. So when you line up the cam marks check to see if the crank lines up with the cutout marker, if not then line up the other cam markings and thin re-check the crank.
I hope this helps.
Lyn.

use a locking tool to keep the cams in place.

prr · « **Reply #2 on:** 19 August 2007, 10:54:32 »

has anyone got anymore info or guideance before i start again
thanxs

prr · « **Reply #3 on:** 19 August 2007, 15:42:22 »

all done job finished and purring thanxs again

News:

Author Topic: 2l timing markings (Read 819 times)

prr

2l timing markings

omegalyn

Re: timing markings

prr

Re: timing markings

prr

Re: 2l timing markings