Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[keno]

Hi All,bit of a cheek really,i done own an omega but am working on one,came to me with a serious oil leak from the bell housing,definitly tramsmission fluid,took out box and replaced torque converter oil seal,put it back together and still pi**ing out,took it out again,thought i might have damaged seal putting it in,it was ok but i put in another new one,still leaking,any help?? please

[hotel21]

Sorry, not my area of expertise.  Try the search function under the logo at the top of the page.  You will no doubt get a few ideas with the results.  

Good luck with the repair...  

[TheBoy]

Is the leak coming from the torque converter seal? Or could it be coming from elsewhere?  Mine was leaking from a pipe, but it ran done bellhousing...

[keno]

It is coming from inside the bellhousing,but i dont think its from the seal but i couldnt see anywhere else inside that could leak,unless it has a fracture in the housing,but its not noisy and it still changes gear ok..

[TheBoy]

Hmm, not sure then, unless coming through one of those bolts that hold bellhousing on.  Or leak in TC itself (unlikely)

[cem_devecioglu]

Mine leak on the left side (passenger for your country) from a socket..But problem is whole socket needed to change not the gasket alone..Hope this helps..

[keno]

This is coming from inside the bellhousing, ,outside is dry,leaks when car is running only.