Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1]   Go Down

Author Topic: 2.5 Gearbox on a 3.0?  (Read 1178 times)

0 Members and 2 Guests are viewing this topic.

omegalord

  • Guest
2.5 Gearbox on a 3.0?
« on: 12 October 2007, 14:38:57 »
TB told me a while ago that the 2.5 is about the same on acceleration as the 3.0 due to different gearing.

Is it possible to put the 2.5 box on a 3.0?
If so it should be rapid on acceleration then shouldnt it?

And would the 2.5 box be able to cope with the 3.0 extra power , and poss 250bp if tuned?

Matt
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106826
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: 2.5 Gearbox on a 3.0?
« Reply #1 on: 12 October 2007, 14:41:06 »
Quote
TB told me a while ago that the 2.5 is about the same on acceleration as the 3.0 due to different gearing.

Is it possible to put the 2.5 box on a 3.0?
If so it should be rapid on acceleration then shouldnt it?

And would the 2.5 box be able to cope with the 3.0 extra power , and poss 250bp if tuned?
Matt
If you are talking the autobox, not a hope in hell.

Also, I believe most of the gearing difference (not all though) is on the diff.
Logged
Grumpy old man

omegalord

  • Guest
Re: 2.5 Gearbox on a 3.0?
« Reply #2 on: 12 October 2007, 14:46:32 »
No im on about a proper manual gearbox.

 :)
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106826
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: 2.5 Gearbox on a 3.0?
« Reply #3 on: 12 October 2007, 14:50:01 »
Quote
No im on about a proper manual gearbox.

 :)
I think the 2.5 manual is rated to 250Nm, the 3.0l manual to 280Nm.  So it depends on torque you are aiming for.

Though I suspect Vx fitted a bigger box to 3.0l for a reason....
Logged
Grumpy old man

omegalord

  • Guest
Re: 2.5 Gearbox on a 3.0?
« Reply #4 on: 12 October 2007, 14:51:51 »
I know its a big job but it would be possible to use the 3.0 bellhousing and put the 2.5 ratios in wouldnt it?

Matt
Logged

JamesV6CDX

  • Omega Queen
  • *****
  • Offline Offline
  • Gloucestershire/Buckinghamshire
  • Posts: 16628
    • Omega 3.2 Retail MV6 LPG
    • View Profile
Re: 2.5 Gearbox on a 3.0?
« Reply #5 on: 12 October 2007, 16:39:30 »
Quote
I know its a big job but it would be possible to use the 3.0 bellhousing and put the 2.5 ratios in wouldnt it?

Matt

The bellhousing for both boxes will be the same, it's the internals that will be different.
Logged

Martin_1962

  • Guest
Re: 2.5 Gearbox on a 3.0?
« Reply #6 on: 12 October 2007, 18:49:25 »
FInal drive I think
Logged

Paul M

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Edinburgh
  • Posts: 1528
    • View Profile
Re: 2.5 Gearbox on a 3.0?
« Reply #7 on: 12 October 2007, 20:34:54 »
Both the final drive and gearbox ratios on the 2.5 are different from the 3.0. The actual figures are on autobahnstormers.com

To be honest I don't think it's worth the effort, doing both combined only lowers the ratios about 10% in 5th. Yes the gearing is too high IMO, but the 2.5 isn't that much better. I seem to remember the guy who used to race Omegas on here (can't remember his username  :-[ ) had a significantly higher diff ratio in one, giving a much lower overall ratio. Not sure where he got it though as there isn't much choice for factory Omega diffs and I don't know what else will fit.
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.044 seconds with 24 queries.