Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1] 2 3  All   Go Down

Author Topic: Headlights  (Read 5512 times)

0 Members and 1 Guest are viewing this topic.

omegadan2.2i

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Worksop, Notts
  • Posts: 73
    • View Profile
Headlights
« on: 27 November 2007, 22:27:47 »
Is it me or are Omega headlights really poor??? :-?

I drove SWMBO's Y reg Polo the other night and this just highlighted how bad my Omega headlights are - I actually think they are quite dangerous especially when oncoming traffic is coming it is really difficult to make out your side of the road.  My previous Carlton headlights were bad, but these seem much worse!! >:(

Any suggestions??

My Omega is 2002 CD Saloon non-Xenons.

Dan
Logged

salvo3.0

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • wiltshire,swindon
  • Posts: 33
    • View Profile
Re: Headlights
« Reply #1 on: 27 November 2007, 22:32:27 »
t-cut the lenses and give a good polish, best you can hope for.
Logged

speakingclock

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • North Wales
  • Posts: 74
    • View Profile
Re: Headlights
« Reply #2 on: 27 November 2007, 22:57:55 »
You're not on your own, tried many things, brighter bulbs etc. Still poor. Be interested to see the replies though :-/
Logged
LPG Open Mixer System Tow Bar Mini Spots

chuck_g

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Cork, Ireland
  • Posts: 50
    • View Profile
Re: Headlights
« Reply #3 on: 27 November 2007, 23:24:21 »
Mine are also crap!!! Im tryin to adjust them but even that doesnt work!!!! Take off the actual glass/plastic part n polish the inside!!! I think its one thing opel messed up wen building the omega!!! Hope it works :)
« Last Edit: 27 November 2007, 23:25:26 by chuck_g »
Logged
O.M.E.G.A -Opel make extra great automobiles

http://www.chucklez84.bebo.com

biggin_boy

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Hampshire
  • Posts: 16
    • View Profile
Re: Headlights
« Reply #4 on: 04 December 2007, 21:36:51 »
the problem with the headlights is that are plastic  :(

i found the best way to restore the headlight is by using a 12,000 grade wet and dry paper which is designed for taking scratches out of glass and perspex

it is hard to find the wet and dry paper
Logged
snap-on scanner up to 2002 all makes hampshire area

cem_devecioglu

  • Guest
Re: Headlights
« Reply #5 on: 04 December 2007, 21:39:58 »
yep mine was bad also..Joined the dark side and added aftermarket xenons  ;D
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 33982
  • Git!
    • View Profile
Re: Headlights
« Reply #6 on: 05 December 2007, 08:21:46 »
Better bulbs and corrrect setup........HID's are an option although its a bit of a grey area
Logged

Rob James

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Sheffield
  • Posts: 143
    • View Profile
Re: Headlights
« Reply #7 on: 05 December 2007, 09:23:47 »
I have xenons in mine, which seem to be plenty bright enough. The problem I have is that they are set way too low, a complete nightmare when driving on a dual carriageway with no street lights. I've only had my car a couple of weeks and plan to take it somewhere to see if they can be adjusted.
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 33982
  • Git!
    • View Profile
Re: Headlights
« Reply #8 on: 05 December 2007, 10:27:00 »
They can be adjusted manualy.
Logged

Rob James

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Sheffield
  • Posts: 143
    • View Profile
Re: Headlights
« Reply #9 on: 05 December 2007, 11:24:16 »
Quote
They can be adjusted manualy.

I'm sure it isn't that difficult to do, but being mechanically ignorant - how do I do that? How do I ensure that I don't raise them too high and blind everyone?

Thanks for your help.

Rob.
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 33982
  • Git!
    • View Profile
Re: Headlights
« Reply #10 on: 05 December 2007, 11:30:34 »
The method that I use is...

I drive upto a garage door on a flat (not neccasary to be level but, must be constantly flat) drive so the bumper is a few inches from the door. I then use a small piece of tape to mark the position of the bright spots (centre top of the beam pattern) of the light output on the door.

Then reverse the car back a few meters and adjust the beam pattern so the bright spot is 10mm ish below the markings......job done.

Interestingly, I have done this on quite a few cars now and every one has subsequently passed the MOT.
Logged

Rob James

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Sheffield
  • Posts: 143
    • View Profile
Re: Headlights
« Reply #11 on: 05 December 2007, 11:46:24 »
Quote
The method that I use is...

I drive upto a garage door on a flat (not neccasary to be level but, must be constantly flat) drive so the bumper is a few inches from the door. I then use a small piece of tape to mark the position of the bright spots (centre top of the beam pattern) of the light output on the door.

Then reverse the car back a few meters and adjust the beam pattern so the bright spot is 10mm ish below the markings......job done.

Interestingly, I have done this on quite a few cars now and every one has subsequently passed the MOT.

OK. I can cope with doing that - how do I actually adjust the height of the beam, or will that be obvious when I take a look?

thanks.

Rob.
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 33982
  • Git!
    • View Profile
Re: Headlights
« Reply #12 on: 05 December 2007, 12:06:41 »
Lift the bonnet and on the top front edge of the lamp you will see two adjusters which accept a hex type drive......one of these does vertical adjustment and the other horizontal.
Logged

Rob James

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Sheffield
  • Posts: 143
    • View Profile
Re: Headlights
« Reply #13 on: 05 December 2007, 12:25:55 »
Quote
Lift the bonnet and on the top front edge of the lamp you will see two adjusters which accept a hex type drive......one of these does vertical adjustment and the other horizontal.
Excellent. Thanks for your help.
Logged

cem_devecioglu

  • Guest
Re: Headlights
« Reply #14 on: 05 December 2007, 12:35:21 »
Quote
The method that I use is...

I drive upto a garage door on a flat (not neccasary to be level but, must be constantly flat) drive so the bumper is a few inches from the door. I then use a small piece of tape to mark the position of the bright spots (centre top of the beam pattern) of the light output on the door.

Then reverse the car back a few meters and adjust the beam pattern so the bright spot is 10mm ish below the markings......job done.

Interestingly, I have done this on quite a few cars now and every one has subsequently passed the MOT.

 ::) :y
Logged
Pages: [1] 2 3  All   Go Up
« previous next »
 

Page created in 0.011 seconds with 17 queries.