Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1]   Go Down

Author Topic: Parts needed?  (Read 1490 times)

0 Members and 1 Guest are viewing this topic.

VX1

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Reading, Berkshire
  • Posts: 2056
    • View Profile
Parts needed?
« on: 29 January 2008, 21:56:18 »

Evening all,

Can some one let me know what the part numbers are for:

Plenum seals:
Waterpump:
Auxillary belt:
Thermostat and seal:
Cambelt Kit:

Paul  :y
Logged
Vx Trade club card holder
Halfords trade card holder

Tafty

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Liverpool
  • Posts: 587
  • This week I am no longer the owner of a miggy!! :(
    • View Profile
Re: Parts needed?
« Reply #1 on: 29 January 2008, 22:32:26 »

Probably tellling you how to suck eggs, but, would be better contacting the stealers with your engine no to get the definative list. However I recently did work on mine (2.6 facelift) and used the following numbers without any problem - your's maybe different

Breather Bridge to Plenum Seal                      90467543
Breather Bridge to Throttle O ring      90500983
Gasket Inlet bridge to head                      90501652
Gasket Inlet to Inlet Bridge                      90501653
Gasket Inlet to plenum (O ring Set 6 off)      9118135
Auxilliary Belt                                   93181720

Hope that helps :-/

Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34014
  • Git!
    • View Profile
Re: Parts needed?
« Reply #2 on: 30 January 2008, 08:19:36 »

Dont worry about these ones:

Gasket Inlet bridge to head                      90501652
Gasket Inlet to Inlet Bridge                      90501653
Gasket Inlet to plenum (O ring Set 6 off)      9118135

Never had to replace any yet!

Also, if this is a job to be done at the cambelt meet then, then I carry spares.

If doing the stat you also need the two O -rings that go onto the link pipe that joins the stat.
Logged

VX1

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Reading, Berkshire
  • Posts: 2056
    • View Profile
Re: Parts needed?
« Reply #3 on: 30 January 2008, 08:30:07 »

Quote
Dont worry about these ones:

Gasket Inlet bridge to head                      90501652
Gasket Inlet to Inlet Bridge                      90501653
Gasket Inlet to plenum (O ring Set 6 off)      9118135

Never had to replace any yet!

Also, if this is a job to be done at the cambelt meet then, then I carry spares.

If doing the stat you also need the two O -rings that go onto the link pipe that joins the stat.

Thanks Mark. You wouldn't happen to know what the part numbers are do you? Just so I can order them from the local stealer's, unfortunately we don't do anything like that where I work.  :( Getting the rest from work water pump, cambelt kit, stat and auxillary belt and antifreeze £54 the lot.

Paul  :y
Logged
Vx Trade club card holder
Halfords trade card holder

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34014
  • Git!
    • View Profile
Re: Parts needed?
« Reply #4 on: 30 January 2008, 08:33:05 »

Quote
Quote
Dont worry about these ones:

Gasket Inlet bridge to head                      90501652
Gasket Inlet to Inlet Bridge                      90501653
Gasket Inlet to plenum (O ring Set 6 off)      9118135

Never had to replace any yet!

Also, if this is a job to be done at the cambelt meet then, then I carry spares.

If doing the stat you also need the two O -rings that go onto the link pipe that joins the stat.

Thanks Mark. You wouldn't happen to know what the part numbers are do you? Just so I can order them from the local stealer's, unfortunately we don't do anything like that where I work.  :( Getting the rest from work water pump, cambelt kit, stat and auxillary belt and antifreeze £54 the lot.

Paul  :y


When you get the stat, make sure its the right one.

There are a lot of aftermarket catalogues that list the 2.0 one as fitting the V6 (is doesn't).

The numbers for the seals I dont have handy.
Logged

andyc

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Norfolk
  • Posts: 1273
    • View Profile
Re: Parts needed?
« Reply #5 on: 30 January 2008, 09:13:12 »

LET US HAVE A CHASSIS NUMBER AND I'LL SORT IT ALL OUTB FOR YOU
Logged
Iceni Automotive. Classic Vauxhall/Opel Specialist. Service, Repairs, Restoration
Thetford. Norfolk

VX1

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Reading, Berkshire
  • Posts: 2056
    • View Profile
Re: Parts needed?
« Reply #6 on: 30 January 2008, 11:58:34 »

Quote
LET US HAVE A CHASSIS NUMBER AND I'LL SORT IT ALL OUTB FOR YOU


The only thing I haven't got is the stat and relevant o rings, if you could sort them out for me, would be appreciated.
Chassis number is

Make VAUXHALL
  Model-Series  
  Model OMEGA ELITE AUTO
  Year 1997-01-30
  Chassis No. W0L000027V1013740
  Engine No. 08140917
  Engine Model Code  
  Fuel Type PETROL
  Engine Capacity 2962
  Power (KW)  
  Transmission AUTOMATIC
  No. of Gears  
  Body Style 4 DOOR SALOON


Paul  :y
Logged
Vx Trade club card holder
Halfords trade card holder
Pages: [1]   Go Up
 

Page created in 0.009 seconds with 16 queries.