Topic: Autobox ECU - what type to which engine? (Read 3499 times)

Marks DTM Calib · « **Reply #15 on:** 25 January 2008, 09:57:08 »

Whats the engine configured to.....auto or manual?

TheBoy · « **Reply #16 on:** 25 January 2008, 10:00:27 »

Engine (last time I saw it) was set to auto. current gearbox ecu is set to 2.5 v6

mkaminski100 · « **Reply #17 on:** 25 January 2008, 10:04:22 »

My engine is 2.016V (X20XEV) and previous autobox ECU was CK model.
New autobox ecu is CK as well, but it's from 2.5 V6 auto and appears as GS820 X25XE (ver5).
I will replace it with previous one (one with updated firmware) and print out the specification

Fault code is from autobox management and there are no fault codes for engine.

TheBoy – I want to attend the Cambelt Party so maybe then you can have a look at it?

mkaminski100 · « **Reply #18 on:** 31 January 2008, 11:17:32 »

I had a gearbox problem yesturday. As you know I am using autobox ECU from 2.5 and while driving on motorway I had a "Automatic gearbox" message and box went to limp mode. Funny thing is that I was driving 70mph next few miles and revs were about 2500. I got confused, as I always thought that when on limp mode it does not go to 4th gear and it was driving the same as previously.
Either it was slipping a lot on 3rd gear or it doesnt go to 4th gear at all.

News:

Author Topic: Autobox ECU - what type to which engine? (Read 3499 times)

Marks DTM Calib

Re: Autobox ECU - what type to which engine?

TheBoy

Re: Autobox ECU - what type to which engine?

mkaminski100

Re: Autobox ECU - what type to which engine?

mkaminski100

Re: Autobox ECU - what type to which engine?