Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[106rallye]

Hey guys.

Im in the middle of changing the dis pack and for the life of me i cant get the dam thing out! everthing is off it but i cant find a hold big enough for it to fit through and get the new one in, tried both the top and the bottom. help please  

[Gaffers]

I take it the scuttle is off??

You might have to remove plenum.... very quick just use a bit of oil on the O rings when replacing

[106rallye]

naa cant remove scuttle, the wipers are seized on and i dont have a puller

[Gaffers]

so were mine when I first tried.  Put a squirt of wd40 in the wiper bolt area tap it lightly with a small hammer and then just wriggle it like f%$£, particularly in and out toward the windscreen and out and it will come off.

[106rallye]

The car is doing my head in! got everytthing back together, leads on the same way, but when i try to start it its as though they are on wrong! im ready to burn this thing!

[TheBoy]

The car is doing my head in! got everytthing back together, leads on the same way, but when i try to start it its as though they are on wrong! im ready to burn this thing!

Just double check passenger bank leads - the order is odd on the DIS...

[106rallye]

ive double and triple checked it against what i have wrote down (which im starting to think must be wrong)

Does anyone know if this is right?

[106rallye]

they numbers arnt the firing order, just what i numbered the leads when i was doing the rocker gaskets

[TheBoy]

That looks wrong to me...

[TheBoy]

Cylinder order is


BACK

         6
5
         4
3
         2
1

FRONT

Still looking for DIS order, from memory its

1 3 5
2 6 4

but hopefully someone can confirm the DIS bit first

[Andy B]

.....

Still looking for DIS order, from memory its

1 3 5
2 6 4

but hopefully someone can confirm the DIS bit first

Mine is (from a note I made when I changed mine)

4   6   2    p
                 l
                 u
1   3   5    g

[TheBoy]

.....

Still looking for DIS order, from memory its

1 3 5
2 6 4

but hopefully someone can confirm the DIS bit first

Mine is (from a note I made when I changed mine)

4   6   2    p
                 l
                 u
1   3   5    g

Yours sounds correct

[106rallye]

.....

Still looking for DIS order, from memory its

1 3 5
2 6 4

but hopefully someone can confirm the DIS bit first

Mine is (from a note I made when I changed mine)

4   6   2    p
                 l
                 u
1   3   5    g

Yours sounds correct

right now im really confused, i changed it to that and its not starting at all, before it would run really rough for a few secs then die, now as soon as it catches its dying   its to dark now so will have to look at it again tomorrow but i have no idea whats wrong

[106rallye]

ok ive checked every single thing 3 or 4 times, everything is in the right order, nothing else is unplugged, tried it with new HT leads and nothing. and to top it all off i think the started as packed in!

only thing i can think of is the park that im trying to fix is damaged, can anyone think of anything else?

[MutantCav]

Is that order correct for the older 95 dis packs?? Only the connector is on the top on the older ones not at the side?? Are the older dispacks different??