Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1]   Go Down

Author Topic: How did that get there???  (Read 1507 times)

0 Members and 2 Guests are viewing this topic.

bighed

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Shropshire
  • Posts: 883
    • View Profile
How did that get there???
« on: 02 April 2008, 21:16:09 »
Just checking round engine bay earlier and noticed this.  :'( :'( Picture is taken looking down into engine bay between rads and engine at very front. . so engine is at top part of pic. Its oil in pic (about an egg cups worth) I know my crank cover gaskets need doing but I think this is a bit far away to be same thing?? I didnt think there was anything oil wise so close to front of car?? HELP!!!!

« Last Edit: 02 April 2008, 22:29:25 by bighed »
Logged

bighed

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Shropshire
  • Posts: 883
    • View Profile
Re: How did that get there???
« Reply #1 on: 02 April 2008, 21:57:29 »
No one got any ideas then cos I dont think it looks good. Gonna be worried to drive it  :'( :'(
Logged

Darth Loo-knee

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Death Star
  • Posts: 18826
  • Jammie smells of Pooh....
    • TIE Fighter
    • View Profile
Re: How did that get there???
« Reply #2 on: 02 April 2008, 22:01:37 »
To be quiet honest mate even by looking at the picture I can't tell where you are meaning :-[
Logged
Everything to do with Omega's. Breaking, Servicing from Cambelts to Oil Changes... Please Pm me for details...

tunnie

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Surrey
  • Posts: 37625
    • Zafira Tourer & BMW 435i
    • View Profile
Re: How did that get there???
« Reply #3 on: 02 April 2008, 22:06:31 »
looks like the passenger side of the V6 cam cover gasket, those clips at the bottom look like they are for the multi-ram pipes?

Leaking cam covers  :y
Logged

bighed

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Shropshire
  • Posts: 883
    • View Profile
Re: How did that get there???
« Reply #4 on: 02 April 2008, 22:09:23 »
Oh sound. (bighed breaths out)  ::) Just seemed a bit far forward to me. But I wouldnt know as just starting learning about omegas. Will just keep an eye on it till do the covers  :y
Logged

Entwood

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • North Wiltshire
  • Posts: 19566
  • My Old 3.2 V6 Elite (LPG)
    • Audi A6 Allroad 3.0 DTI
    • View Profile
Re: How did that get there???
« Reply #5 on: 02 April 2008, 22:10:52 »
Quote
Picture is taken looking down into engine bay between rads and lump at very front.

I'm thinking this is looking straight down at the front ??? So the oil is collecting on the top of the under tray ??

If so it could be coming from anywhere, the undertray is quite large and the oil will collect at the lowest point ONCE YOU ARE STATIONARY. It is therefore no indication of the position of the leak.

Wipe down as much of the engine as you can and run at tickover looking for leaks, check the plug holes, remove the plenum and look in the V.. about all I can suggest.. :(
Logged

bighed

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Shropshire
  • Posts: 883
    • View Profile
Re: How did that get there???
« Reply #6 on: 02 April 2008, 22:15:07 »
Not undertray. This is at the very front of the engine. Looks like a sump guard or something to me. You can see where it ends at the top of the pic. The bit inbetween the lip and the strange white looking thing is the ground.  :y
« Last Edit: 02 April 2008, 22:16:28 by bighed »
Logged

Eliteman Steve

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Brighton
  • Posts: 125
    • View Profile
Re: How did that get there???
« Reply #7 on: 02 April 2008, 22:45:03 »
When my rocker gaskets needed doing the oil started running out of the front of the engine as my drive was on a forward facing slope  :o. I think it was running the full length of the engine cos they were leaking towards the rear of the engine .

If you haven't done the breathers and rocker gaskets yet and you get a whiff of oil smoke at the lights , I'd say thats your best bet . :y
Logged

bighed

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Shropshire
  • Posts: 883
    • View Profile
Re: How did that get there???
« Reply #8 on: 02 April 2008, 22:47:36 »
Yeah it does smell. Getting a bit worse now. Bit I cant understand is where the oil is sitting is about an inch in front of the block. Cant see how its travelling through the air to get there cos no part of engine overhangs where oil is settled??  :-?
Logged

markey mark

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • SLady bitshorpe north lincs
  • Posts: 4236
  • banned for repeatedly reneaging on deals.
    • View Profile
Re: How did that get there???
« Reply #9 on: 02 April 2008, 23:06:23 »
Quote
Yeah it does smell. Getting a bit worse now. Bit I cant understand is where the oil is sitting is about an inch in front of the block. Cant see how its travelling through the air to get there cos no part of engine overhangs where oil is settled??  :-?

it runs down block and sits were ever it stops fella  :-/
Logged

bighed

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Shropshire
  • Posts: 883
    • View Profile
Re: How did that get there???
« Reply #10 on: 02 April 2008, 23:37:11 »
Yeah but the block is nowhere near where the oil has stopped. The front of block is about an inch away  :-?
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.025 seconds with 17 queries.