Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[markomega25]

Hi guy's

I finally got all the jobs done and its off to get that MoT on Saturday. I must say that having done the wishbones once, and now knowing all the pitfalls and the tricks to do them, and getting the tools, they would probably not take too long - it has taken me ages.

Just test drove the car for a bit, it all runs straight and true - no pulling either side - but will keep an eye on tyre wear.

The Walkers exhausts went on pretty easily, it all fits nice and snug, and sounds fine.

My next job once the MoT is under the belt, is to get the cruise control working!

[markomega25]

Just got back from MoT centre - it passed  

Thanks to all for the advice on here, much appreciated.

[Entwood]

Nice one .. some good news at last ..

[Nextgen]

Word of caution on getting pattern centre sections if you have an Irmscher tail pipe - sometimes they don't fit :-)
Also: The previous owner of my omega was screwed when they told him is new exhaust was better than the old one, and they secretly squirreled away the shiny Irmscher box.....