Topic: ABS/TC ECU Change (Read 1318 times)

dbug · « **Reply #15 on:** 26 September 2008, 10:04:05 »

Quote

Struggling with the bottom 2 and the rear middle one...but only because I wanted to be sure the change of ECU actually fixed the problem before carrying on to find it was still 'dangle berries'ed...plus it was very securely on with just the 3 anyway and held on at the bottom by the cable/plug

I know some other OOFers have managed to get all 6 screws back in (impressed with their dedication & persistence). I found the last one very difficult & having refitted 5 was by then a bit p*ssed off with ABS ECUs! Been running some time now on the 5 - no issues

MutantCav · « **Reply #16 on:** 26 September 2008, 10:15:00 »

I figure as you can push the screws half way in before screwing in its probably easy to do but couldnt be bothered by then lol

I have to say I'm pleased I have little hands as could easily retrieve the ratchet, torx bit etc etc when they dropped down into the engine bay lol

News:

Author Topic: ABS/TC ECU Change (Read 1318 times)

dbug

Re: ABS/TC ECU Change

MutantCav

Re: ABS/TC ECU Change