Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1]   Go Down

Author Topic: Radiator drain plug.  (Read 844 times)

0 Members and 1 Guest are viewing this topic.

wakeyomega

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Wakefield
  • Posts: 450
    • View Profile
Radiator drain plug.
« on: 21 September 2008, 09:44:56 »

Can anybody please confirm 100% if the radiator drain plug should have a seal / washer between the knurled thumbscrew and the face of the rad? (I'm aware there are two rubber sealing rings further down on the drain plug body).
Thanks Pat
facelift V6 2.5 petrol.
Logged
Remember, if you ever need a helping hand, you'll find one at the end of your arm

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39729
    • ML350 TDM SmartRoadster
    • View Profile
Re: Radiator drain plug.
« Reply #1 on: 21 September 2008, 09:47:10 »

Quote
Can anybody please confirm 100% if the radiator drain plug should have a seal / washer between the knurled thumbscrew and the face of the rad? (I'm aware there are two rubber sealing rings further down on the drain plug body).
Thanks Pat
facelift V6 2.5 petrol.

DEFINITELY only 2 rubber 'O' rings.
 :y :y

« Last Edit: 21 September 2008, 09:50:51 by Andy_B »
Logged

wakeyomega

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Wakefield
  • Posts: 450
    • View Profile
Re: Radiator drain plug.
« Reply #2 on: 21 September 2008, 09:48:49 »

Thanks Andy

Pat
Logged
Remember, if you ever need a helping hand, you'll find one at the end of your arm

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39729
    • ML350 TDM SmartRoadster
    • View Profile
Re: Radiator drain plug.
« Reply #3 on: 21 September 2008, 09:51:00 »

Quote
Thanks Andy

Pat

Can we assume you're losing water? The leak from the core of my rad seemed to collect around the drain plug, my cheap, easy reason for its replacement while on holiday last year. You sure you don't have a leak further up the rad?  :-/  :(
Logged

wakeyomega

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Wakefield
  • Posts: 450
    • View Profile
Re: Radiator drain plug.
« Reply #4 on: 21 September 2008, 10:09:50 »

Its a long story Andy, going back 2 years. My drain plug was leaking then, and I foolishly tightened it with some grips and the knurled thumbscrew snapped off like a carrot but it was still leaking. I then attempted to remove it in situ with various home made devices and whilst tapping in a stud remover with a hammer (yes, I was getting desperate) I noticed the leak stopped. So I left it, for two years! I finally got around to removing the radiator this week and drilling out the old drain plug. I put a new one in, refitted the rad and guess what - the drainplug leaks, so I'm resigned to a new radiator. I could have left well alone, but sods law says that it would have started leaking again in deep winter when I hibernate  :)

Cheers Pat
Logged
Remember, if you ever need a helping hand, you'll find one at the end of your arm

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39729
    • ML350 TDM SmartRoadster
    • View Profile
Re: Radiator drain plug.
« Reply #5 on: 21 September 2008, 10:29:37 »

Quote
..... I put a new one in, refitted the rad and guess what - the drainplug leaks, so I'm resigned to a new radiator.  .....

I've got some of this --> Magic Bond in the garage. I used it to repair leaking petrol tank on my Senator & it does stck like the proverbila to a blanket. Are you very far from next week ends York meet? I could bring some with me. If it works, you've just save £200, if it doesn't ....
You could always take off a hose if you need to drain your coolant in the future.
Logged

wakeyomega

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Wakefield
  • Posts: 450
    • View Profile
Re: Radiator drain plug.
« Reply #6 on: 21 September 2008, 11:35:44 »

I like your idea Andy. Probably won't make the York meet unfortunately, but will get some Magic bond or similar epoxy resin, as you say for a couple of quid I've got nothing to lose.

Thanks again, Pat
« Last Edit: 21 September 2008, 11:36:33 by wakeyomega »
Logged
Remember, if you ever need a helping hand, you'll find one at the end of your arm

wakeyomega

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Wakefield
  • Posts: 450
    • View Profile
Re: Radiator drain plug.
« Reply #7 on: 26 September 2008, 18:48:22 »

Hi Andy
Just to say thanks - magic Bond did the trick. I don't like bodges - but I do like saving £200! Enjoy York

Pat
Logged
Remember, if you ever need a helping hand, you'll find one at the end of your arm

HerefordElite

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Hereford
  • Posts: 1724
  • Welcome to the Shire
    • View Profile
Re: Radiator drain plug.
« Reply #8 on: 26 September 2008, 19:12:34 »

Quote
Hi Andy
Just to say thanks - magic Bond did the trick. I don't like bodges - but I do like saving £200! Enjoy York

Pat


sounds like an engineered solution to me not a bodge ;) - especialy if it saves 200 quidlies :y
Logged
Nova SR, MKII Cav Sri130, MKII Astra GTE16v, Omega 3.0V6 Elite, Silver Cross Sleepover Classic
Pages: [1]   Go Up
 

Page created in 0.011 seconds with 18 queries.