Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[omegav6est]

hi all i have a 2.5 v6 cdx  on a p plate and the problem is this.....i removed the climate control panel to renew several blown bulbs on refitting everything lights up as it should but i only have hot air from the vents.both the temp displays will go up to the high and down to the low settings but all  i get is hot air.prior to me removing the cc panel the air con was perfect in fact she recently had a brand new compressor and a regas and i had lovely cold air blowing out the vents.all there is behind that panel is two wiring connecter blocks both of which are fully inserted into the correct places.should i have done anything on refitting the panel eg:resetting the memory or something.tricky one i think.thanks

[feeutfo]

is ECO selected? Is the ac pump engageing? 4 knobs should be turning, on the pump on aux belt bottom right pulley in engine bay, when ac is working.

[dbug]

Try resetting servos

[omegav6est]

thanks guys i thought i had reset the servos but tried again and success all is now working again