Topic: Heating Problem (Read 1152 times)

Edd · « **on:** 16 November 2008, 22:50:00 »

Hi

Kinda new around the Omega but found that the heating isnt working in my CDX 02 plate

What can i check and where i.e its alright saying check heater matrix but how do i access it and pressures etc

thanks in advance

Edd

trademeister · « **Reply #1 on:** 16 November 2008, 23:42:00 »

Hi mate. Is it using any water?? A common fault with these is the hbp valve ( heater bypass valve). Mine had gone when I bought mine and I think the guy selling it thought it was the head gasket thats why I got it so cheap!! Its a plastic cylinder with 3 pipes going into it and its a sod to get to!! It sits over the bellhousing under the skuttle panel. Mine took me 2 and a half hours to do!! Hope this helps. Trademeister

Albatross · « **Reply #2 on:** 17 November 2008, 01:02:15 »

If you're going to investigate changing the HBV (Heater Bypass Valve) which is a known and common problem, read this...

http://www.omegaowners.com/forum/YaBB.pl?num=1193594464

Edd · « **Reply #3 on:** 17 November 2008, 09:08:52 »

Thanks guys, I will investigate today

Edd · « **Reply #4 on:** 17 November 2008, 09:17:54 »

Ok No loss of coolant any other checks I can try please

This also seems intermittent as at one point i had heating the when i started the car again it was gone

Edd · « **Reply #5 on:** 17 November 2008, 21:00:06 »

Please

Marks DTM Calib · « **Reply #6 on:** 17 November 2008, 21:43:23 »

Where are you?

Edd · « **Reply #7 on:** 18 November 2008, 21:34:24 »

Not far from lakeside essex

News:

Author Topic: Heating Problem (Read 1152 times)

Edd

Heating Problem

trademeister

Re: Heating Problem

Albatross

Re: Heating Problem

Edd

Re: Heating Problem

Edd

Re: Heating Problem

Edd

Re: Heating Problem

Marks DTM Calib

Re: Heating Problem

Edd

Re: Heating Problem