Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[wakedude]

i have got a new sensor,but not had time to fit it as been at work.will let you know the outcome when fitted.(prob monday)

[wakedude]

Guys,i am really struggling to find the end of the sensor at the top of the engine,i have the car on an axle stand and have located the bottom of the sensor near the oil filter.Is there an easy way to locate this? I have removed the scuttle tray too,and although its tight i am still unable to locate the end.Any ideas please? :-?

[RobG]

Guys,i am really struggling to find the end of the sensor at the top of the engine,i have the car on an axle stand and have located the bottom of the sensor near the oil filter.Is there an easy way to locate this? I have removed the scuttle tray too,and although its tight i am still unable to locate the end.Any ideas please? :-?

http://www.omegaowners.com/forum/YaBB.pl?num=1174321688

[wakedude]

thnx already looked at that,not really helpful for finding the end.

[Marks DTM Calib]

Its here:



Its the three pin connector which in this picture is by the engine lifting eye on the back right of the engine (bottom left of pic)....note the pic above is taken from the flywheel end

[Marks DTM Calib]

Maintenance guide updated to add the connector location photo

[wakedude]

thanks for the pic,that is a big help.Is that a 2.5 V6 engine in the pic?
I reckon mine is different(not had a look yet,im at work),either that or ive got the wrong sensor....doh!

[albitz]

2.5/3.0 both the same in this regard.The sensor is just beside the oil filter and the other end (connecting plug)is in the photo as mdtm has said.Make sure you route the sensor wiring as per the guide,rather than how it is originally routed.