Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Martin_1962]

What do I soak in what?


Got some penetration oil somewhere, plenty of grease, where should I start?

[Marks DTM Calib]

Front and rear control arms.

I personaly remove them, strip them down, clean and grease them and then re-build them.

[feeutfo]

Track rods, if thats the right term, adjusts the toe(tracking) front and back, they always seize. But nothing a monkey wrench and some heat wont sort.
 
 If you can get enough lube in there to make any difference i would be suprised. It really wants removal, clean and a good greaseing, but then youve got to get it back on and adjust it up to the right position. Or pay the operator to do it if he finds a problem :-)
Daw, Mark beat me to it. What he said...

[Marks DTM Calib]

Track rods, if thats the right term, adjusts the toe(tracking) front and back, they always seize. But nothing a monkey wrench and some heat wont sort.
 
 If you can get enough lube in there to make any difference i would be suprised. It really wants removal, clean and a good greaseing, but then youve got to get it back on and adjust it up to the right position. Or pay the operator to do it if he finds a problem :-)
Daw, Mark beat me to it. What he said...

With the dissasembly route......count the turns off and count the turns on...because its the same parts then the same settings are maintained.