Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: help: cat or lamba sensor?  (Read 1085 times)

0 Members and 1 Guest are viewing this topic.

mantagte

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • great yarmouth
  • Posts: 1777
    • omega bmw maverick
    • View Profile
help: cat or lamba sensor?
« on: 20 January 2009, 12:00:36 »
hi  omega 2.0 16v 1995 failed on emmisions today
co should be below 0.30
actual readings 0.54 and 0.48

lamba should be between .97-1.03
actual readinds 1.048 and 1.047
so is it the cat or lamba or both
cheers :-[
« Last Edit: 20 January 2009, 12:50:55 by mantagte »
Logged

lee4206

  • Senior Member
  • ****
  • Online Online
  • Gender: Male
  • southampton
  • Posts: 679
  • Mot Tester
    • 2000 3.0l manual MV6
    • View Profile
Re: help: cat or lamba sensor?
« Reply #1 on: 20 January 2009, 18:32:44 »
The fact that they are both high suggests its the cat i'm afraid.
lee
Logged
VAUXHALL TRADE CLUB AND HALFORDS TRADE CARD  AND V6 LOCKING KIT HOLDER  always happy to help if poss

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34016
  • Git!
    • View Profile
Re: help: cat or lamba sensor?
« Reply #2 on: 20 January 2009, 19:33:13 »
Quote
The fact that they are both high suggests its the cat i'm afraid.
lee

I disagree....if it was just the cat the lambda should be about right and the CO would be high (the cat is post lambda).

Any fault codes stored for a starter!
Logged

mantagte

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • great yarmouth
  • Posts: 1777
    • omega bmw maverick
    • View Profile
Re: help: cat or lamba sensor?
« Reply #3 on: 20 January 2009, 20:11:33 »
codes read
12 12 12
33 33 33
39 39 39
12 12 12 etc
33 been there since ive had the car 4 years or so
39 is new to me
dont know what either mean though
Logged

Entwood

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • North Wiltshire
  • Posts: 19566
  • My Old 3.2 V6 Elite (LPG)
    • Audi A6 Allroad 3.0 DTI
    • View Profile
Re: help: cat or lamba sensor?
« Reply #4 on: 20 January 2009, 20:20:08 »
Fault codes can be found here ...

http://www.omegaowners.com/forum/YaBB.pl?num=1160152415

12 = Start of sequence
33 = Exhaust Gas Recirculation (EGR) Valve Voltage Low
39 = O2 Sensor 1 Circuit Voltage High

so I'd try blanking off the EGR
Logged

mantagte

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • great yarmouth
  • Posts: 1777
    • omega bmw maverick
    • View Profile
Re: help: cat or lamba sensor?
« Reply #5 on: 20 January 2009, 20:43:20 »
so I'd try blanking off the EGR

found a how to on the net will have a go tomorrow and
see if it works
thanks for the link to codes
Logged

mantagte

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • great yarmouth
  • Posts: 1777
    • omega bmw maverick
    • View Profile
Re: help: cat or lamba sensor?
« Reply #6 on: 21 January 2009, 12:35:02 »
ok did the egr blanking thingy
code 39 has gone
still got code 33
seems odd would have thought it would be the other way round
any more ideas chaps :)
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34016
  • Git!
    • View Profile
Re: help: cat or lamba sensor?
« Reply #7 on: 21 January 2009, 13:52:51 »
Well thats good news.

The EGR is stuck in one postion, blanking it is not un-stiking it, but will stop the gases flowing when they shouldn't.

You might find that cleaning the pintel on the EGR with a good oven cleaner a few times gets rid of the other code (so it free to move again).

The fact the lambda fault code is now gone sudgests that your emissions may now be ok....lambda should certainly be ok!
Logged

Shagma

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Norway
  • Posts: 113
    • View Profile
Re: help: cat or lamba sensor?
« Reply #8 on: 21 January 2009, 16:13:48 »
Quote
ok did the egr blanking thingy
code 39 has gone
still got code 33
seems odd would have thought it would be the other way round
any more ideas chaps :)

Did you notice any significant changes after blanking off EGR? Power increas...? Power decrease?
Logged

mantagte

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • great yarmouth
  • Posts: 1777
    • omega bmw maverick
    • View Profile
Re: help: cat or lamba sensor?
« Reply #9 on: 21 January 2009, 20:16:39 »
seems to tick over smoother
no noticable power increase
going to norwich tomorrow will find out more then
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.02 seconds with 20 queries.