Topic: 2.2 CD not starting (Read 573 times)

suzieqt · « **on:** 21 January 2009, 17:29:36 »

hi all can anyone help
my 2.2 Miggy not starting,
when trying to start the car the engine turns but does not start up,

on the dash when the ignition is turned on, are two lights staying on the Eml and the car with the spanner in.
they are not flashing ,they just stay on ,there was no problem this morning as used for a taxi again for kid's

when came back, was in the process of maybe cleaning the camsensor
as previously the light on the dash with a spanner through sometimes came on ,and someone reccomended cleaning it.
but when i took the cover slightly off and seen in ,i thought no chance

But since then car has not started

Auto Addict · « **Reply #1 on:** 22 January 2009, 07:07:20 »

Sounds like a faulty cam sensor, you need to get the codes read to confirm.

If it is, only replace with a genuine Vx part.

tunnie · « **Reply #2 on:** 22 January 2009, 08:32:45 »

I would say more the crank sensor? I think the 2.2 can start without the cam sensor plugged in

suzieqt · « **Reply #3 on:** 22 January 2009, 20:35:21 »

i am replacing them both cam sensor and the crankshaft sensor
but what an nightmare to get to the crankshaft sensor------

any easier way of getting to it ?

News:

Author Topic: 2.2 CD not starting (Read 573 times)

suzieqt

2.2 CD not starting

Auto Addict

Re: 2.2 CD not starting

tunnie

Re: 2.2 CD not starting

suzieqt

Re: 2.2 CD not starting