Topic: My reversing sensors are not beeping (Read 720 times)

Martin_1962 · « **on:** 02 June 2009, 19:05:34 »

After market kit an found out tonight they don't work - will have to trace all the wiring tomorrow and try to fix.

VXL V6 · « **Reply #1 on:** 02 June 2009, 20:00:21 »

Presuming you have wired it into the reverse light 12V so are the reversing lights coming on?

Martin_1962 · « **Reply #2 on:** 02 June 2009, 20:10:18 »

Just rewired the buzzer (fractured wire) and very very quiet.

Will check voltage tomorrow and obtain a new buzzer

Martin_1962 · « **Reply #3 on:** 02 June 2009, 20:10:48 »

They have been on over 3 years :-?

Pitchfork · « **Reply #4 on:** 02 June 2009, 20:19:43 »

Are you going backwards? :question

Bent valve · « **Reply #5 on:** 02 June 2009, 20:30:23 »

Quote

After market kit an found out tonight they don't work - will have to trace all the wiring tomorrow and try to fix.

How did you find out?

Lizzie_Zoom · « **Reply #6 on:** 02 June 2009, 20:33:13 »

Quote

Quote
After market kit an found out tonight they don't work - will have to trace all the wiring tomorrow and try to fix.
How did you find out?

Hopefully by giving a good bump to a BMW, as I did the other day in a very tight space that I squeezed into

. No damage to either car, but the other woman driver wasn't happy

Andy B · « **Reply #7 on:** 02 June 2009, 20:33:41 »

Quote

.....
How did you find out?

Suddenly?

Martin_1962 · « **Reply #8 on:** 02 June 2009, 21:51:36 »

Didn't go beep beep beep when I put it into reverse

Will check Maplins later in the week

Martin_1962 · « **Reply #9 on:** 02 June 2009, 21:52:24 »

I rebuilt the buzzer, new wires (old were damaged) but the buzzer plate is now too quiet

kjf7 · « **Reply #10 on:** 02 June 2009, 23:43:12 »

maybe you have'nt got close enough to anything to set it off