Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1] 2  All   Go Down

Author Topic: b**tard bolt  (Read 2639 times)

0 Members and 1 Guest are viewing this topic.

psl

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • New Malden (Surrey)
  • Posts: 248
    • View Profile
b**tard bolt
« on: 29 June 2009, 10:28:19 »
I've replaced my thermostat (all part of doing my oil cooler) and was trying to put the B Bolt back in when I droped it, recovered the bolt but not the waser/spacer. I've spoken to vauxhall and they say there isnt a washer, so should there be one or not and does any one have a part no if there should be?
Logged

feeutfo

  • Guest
Re: b**tard bolt
« Reply #1 on: 29 June 2009, 11:42:34 »
dont remember a washer or spacer. But trusting my memory is not advised. Is it possible the bolt has been replaced with one that a bit too long and the washer is there to take up the slack? You may have to try it for length and see if it tightens up nicely. If not fit another washer. Means re fitting the bugger again though.
« Last Edit: 29 June 2009, 11:44:19 by chrisgixer »
Logged

psl

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • New Malden (Surrey)
  • Posts: 248
    • View Profile
Re: b**tard bolt
« Reply #2 on: 29 June 2009, 11:48:33 »
if it has been replaced with a longer one I want to replace it as there is no space to get it in and it is living up too its reputation, any one else remember weather there is a washer or have a part no.
Logged

ScottieMV6

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Swinton, Manchester
  • Posts: 1140
    • View Profile
Re: b**tard bolt
« Reply #3 on: 29 June 2009, 12:28:49 »
I did exactly the same thing. AFAIK there should be a spacer. I ended up replacing with a shorter bolt without the spacer and it seems to have worked fine!  :y
Logged
I'd rather be scared to death than bored to death!!

psl

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • New Malden (Surrey)
  • Posts: 248
    • View Profile
Re: b**tard bolt
« Reply #4 on: 29 June 2009, 12:39:15 »
just checked the book of lies and it shows and talks of a spacer, just goes to show what the stealers know.
Logged

shammster

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Essex, UK
  • Posts: 178
    • View Profile
Re: b**tard bolt
« Reply #5 on: 29 June 2009, 12:44:08 »

Mine had a spacer, replaced with a shorter bolt.
Logged
So many cars to fix, oh well open the beer!

Martin_1962

  • Guest
Re: b**tard bolt
« Reply #6 on: 29 June 2009, 22:37:56 »
I used washers to get mine right - I had to use a different bolt as the original was rounded and loctited
Logged

Diamond Black Geezer

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • N E Lincolnshire & Warwickshire
  • Posts: 5719
  • Diamond Black '96 CDX V6 - 'Pissy'
    • & a silly coupe coming...
    • View Profile
Re: b**tard bolt
« Reply #7 on: 30 June 2009, 00:54:45 »
Why dont dealers know anything?!!? I mean, honestly, it doesnt matter what the inquiry, I have to sit them down and patiently talk them through the simplest of tasks!

« Last Edit: 30 June 2009, 00:55:24 by DiamondBlackGeezer »
Logged
Ex-Dealer Kent-Moore Rear Wheel Bearing Tool available for hire, PM for details.

"There's no point in being grown up if you can't be childish sometimes." 4th Doctor

psl

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • New Malden (Surrey)
  • Posts: 248
    • View Profile
Re: b**tard bolt
« Reply #8 on: 30 June 2009, 09:18:51 »
does anyone know why vaux used a longer bolt with a spacer?
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34026
  • Git!
    • View Profile
Re: b**tard bolt
« Reply #9 on: 30 June 2009, 11:15:23 »
Coz its easier to fit (which is everything in a production environment)
Logged

psl

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • New Malden (Surrey)
  • Posts: 248
    • View Profile
Re: b**tard bolt
« Reply #10 on: 30 June 2009, 12:16:53 »
if theres one thing i've lernt, its nothing makes puting that bolt in easyer, I think I'm going to take the pas resivour out now  :-[
Logged

andyc

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Norfolk
  • Posts: 1273
    • View Profile
Re: b**tard bolt
« Reply #11 on: 30 June 2009, 12:41:48 »
are you talking about the bolt for the stat bridge pipe thats tucked behind the dip stick tube??

Andy
Logged
Iceni Automotive. Classic Vauxhall/Opel Specialist. Service, Repairs, Restoration
Thetford. Norfolk

psl

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • New Malden (Surrey)
  • Posts: 248
    • View Profile
Re: b**tard bolt
« Reply #12 on: 30 June 2009, 13:01:42 »
yes
Logged

andyc

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Norfolk
  • Posts: 1273
    • View Profile
Re: b**tard bolt
« Reply #13 on: 30 June 2009, 13:22:17 »
well this is a screen dump from ECP showing the star set up


I can't see a spacer or washer listed either to go with bolt bumper 16

cheers
Andy
Logged
Iceni Automotive. Classic Vauxhall/Opel Specialist. Service, Repairs, Restoration
Thetford. Norfolk

psl

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • New Malden (Surrey)
  • Posts: 248
    • View Profile
Re: b**tard bolt
« Reply #14 on: 30 June 2009, 13:49:50 »
finally, its taken all morning and part of yeasterday but its in, took the battery out in the end for a better angle for my arm.

now to get back to flushing and cam cover gaskets.
Logged
Pages: [1] 2  All   Go Up
« previous next »
 

Page created in 0.011 seconds with 17 queries.