Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1] 2  All   Go Down

Author Topic: Removed SAI pipes and still got fault code  (Read 1617 times)

0 Members and 1 Guest are viewing this topic.

ScottieMV6

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Swinton, Manchester
  • Posts: 1140
    • View Profile
Removed SAI pipes and still got fault code
« on: 07 July 2009, 14:15:53 »
I have removed all the SAI pipework and have blocked off the two pipes that go in to the exhaust manifold. I have also blocked up the pipe that comes out of the solenoid valve (assume this is correct).

I have unplugged the SAI pump under front wing. However I still have fault code 46. Also, the car now seems to hesitate if I try to put my foot down.

Any ideas please?
Logged
I'd rather be scared to death than bored to death!!

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106899
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Removed SAI pipes and still got fault code
« Reply #1 on: 07 July 2009, 19:35:16 »
sigh.  did you leave the solenoid in place?
Logged
Grumpy old man

feeutfo

  • Guest
Re: Removed SAI pipes and still got fault code
« Reply #2 on: 07 July 2009, 20:40:45 »
thought it was just a case of unpluging it? Obviously not?
Logged

Darth Loo-knee

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Death Star
  • Posts: 18826
  • Jammie smells of Pooh....
    • TIE Fighter
    • View Profile
Re: Removed SAI pipes and still got fault code
« Reply #3 on: 07 July 2009, 20:56:27 »
As far as I remember as I did it on Mrs. Loo-knee's Elite was remove the SAI Pipe which is a silvery coloured pipe that runs horizontally from a rubber pipe down by the Air con pump to a rubber pipe underneath the water pipe next to the aux belt tensioner pulley, these are the rubber pipes that need blocking up. There is also the part of this SAI pipe that goes Vertical with a pipe almost in a U shape that ges to a solenoid, just remove that pipe leaving the solenoid.
Then unplug the SAI Pump under the wheel arch in front of the passenger side tyre.
That as I remember should be it.   :y
Logged
Everything to do with Omega's. Breaking, Servicing from Cambelts to Oil Changes... Please Pm me for details...

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106899
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Removed SAI pipes and still got fault code
« Reply #4 on: 07 July 2009, 21:29:27 »
ANY SAI fault code is due to solenoid. No ifs or buts.
Logged
Grumpy old man

ScottieMV6

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Swinton, Manchester
  • Posts: 1140
    • View Profile
Re: Removed SAI pipes and still got fault code
« Reply #5 on: 08 July 2009, 08:23:23 »
Appreciate that TB and have taken on board all the prior info given regarding this.

I have done everything that Daz (Loo Knee) has described above apart from removing the pipe on the solenoid. I have simply blocked this up.

The solenoid is still there and is plugged in. Are you saying that I should replace the solenoid?  :(
Logged
I'd rather be scared to death than bored to death!!

CaptainZok

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Bolton
  • Posts: 8093
  • Victim of Cyberbullying.
    • 3.2 MV6 Estate
    • View Profile
Re: Removed SAI pipes and still got fault code
« Reply #6 on: 08 July 2009, 10:59:07 »
Could it be conned into thinking the solenoid was still in place and functional with a resistance or would it need to see impedance as well?
Logged
PM me for code reading/clearing
TuBy's new whipping boy.

Kevin Wood

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Alton, Hampshire
  • Posts: 36407
    • Jaguar XE 25t, Westfield
    • View Profile
Re: Removed SAI pipes and still got fault code
« Reply #7 on: 08 July 2009, 11:59:22 »
A simple resistance would almost certainly fool the ECU into thinking it has an intact circuit. Must be something  up with the solenoid / wiring in this case.

Kevin
Logged
Tech2 services currently available. See TheBoy's price list: http://theboy.omegaowners.com/

CaptainZok

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Bolton
  • Posts: 8093
  • Victim of Cyberbullying.
    • 3.2 MV6 Estate
    • View Profile
Re: Removed SAI pipes and still got fault code
« Reply #8 on: 08 July 2009, 12:55:50 »
Hmm I can see the Gnome being sent out armed with a meter and a box of resistors when he gets home from school.
Logged
PM me for code reading/clearing
TuBy's new whipping boy.

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 33990
  • Git!
    • View Profile
Re: Removed SAI pipes and still got fault code
« Reply #9 on: 08 July 2009, 13:04:34 »
Quote
Hmm I can see the Gnome being sent out armed with a meter and a box of resistors when he gets home from school.

1K will do the job
Logged

ScottieMV6

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Swinton, Manchester
  • Posts: 1140
    • View Profile
Re: Removed SAI pipes and still got fault code
« Reply #10 on: 08 July 2009, 13:12:38 »
You have all lost me now. What is all this about resistors? Do I need to change the solenoid?  :'(
Logged
I'd rather be scared to death than bored to death!!

CaptainZok

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Bolton
  • Posts: 8093
  • Victim of Cyberbullying.
    • 3.2 MV6 Estate
    • View Profile
Re: Removed SAI pipes and still got fault code
« Reply #11 on: 08 July 2009, 13:15:15 »
Quote
Quote
Hmm I can see the Gnome being sent out armed with a meter and a box of resistors when he gets home from school.

1K will do the job
1/4w or something more substantial?
Logged
PM me for code reading/clearing
TuBy's new whipping boy.

CaptainZok

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Bolton
  • Posts: 8093
  • Victim of Cyberbullying.
    • 3.2 MV6 Estate
    • View Profile
Re: Removed SAI pipes and still got fault code
« Reply #12 on: 08 July 2009, 13:27:56 »
Quote
You have all lost me now. What is all this about resistors? Do I need to change the solenoid?  :'(
I was thinking that your SAI solenoid was faulty and as you have removed the rest of the system it would be easier to fool the ECU into thinking it was still there with a resistor rather than replace the solenoid just to remove the fault code and extinguish the EML.
Logged
PM me for code reading/clearing
TuBy's new whipping boy.

Kevin Wood

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Alton, Hampshire
  • Posts: 36407
    • Jaguar XE 25t, Westfield
    • View Profile
Re: Removed SAI pipes and still got fault code
« Reply #13 on: 08 July 2009, 13:41:35 »
Quote
Quote
Quote
Hmm I can see the Gnome being sent out armed with a meter and a box of resistors when he gets home from school.

1K will do the job
1/4w or something more substantial?

V2/R = 0.2 W  :y

Kevin
Logged
Tech2 services currently available. See TheBoy's price list: http://theboy.omegaowners.com/

CaptainZok

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Bolton
  • Posts: 8093
  • Victim of Cyberbullying.
    • 3.2 MV6 Estate
    • View Profile
Re: Removed SAI pipes and still got fault code
« Reply #14 on: 08 July 2009, 13:47:28 »
Quote
Quote
Quote
Quote
Hmm I can see the Gnome being sent out armed with a meter and a box of resistors when he gets home from school.

1K will do the job
1/4w or something more substantial?

V2/R = 0.2 W  :y

Kevin
Finally switched my brain on and remembered Ohms Law.
 ;D
Logged
PM me for code reading/clearing
TuBy's new whipping boy.
Pages: [1] 2  All   Go Up
« previous next »
 

Page created in 0.01 seconds with 18 queries.