Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Pete Elite]

I've been having a bit of slipping and clunky changes on my Autobox which I've been putting down to an overheating problem i had(hopefully solved now)as it only seemed to do it when the engine got very hot(over 100 degrees)but i thought I'd check the fluid so did it as stated in the how to section but only managed to get about 3/4 of a litre in and when lowered car it still didn't come out .
  Whats the best way to put the fluid in as the bottle i got has only got a short pull out tube and you can't get the bottle high enough to pump it in .

              Any suggestions appreciated .

[sparkyw666.]

I've been having a bit of slipping and clunky changes on my Autobox which I've been putting down to an overheating problem i had(hopefully solved now)as it only seemed to do it when the engine got very hot(over 100 degrees)but i thought I'd check the fluid so did it as stated in the how to section but only managed to get about 3/4 of a litre in and when lowered car it still didn't come out .
  Whats the best way to put the fluid in as the bottle i got has only got a short pull out tube and you can't get the bottle high enough to pump it in .

              Any suggestions appreciated .

trie using a bit of hose pipe on the end of your bottle jack the car up stick it in lower it then squirt away  u know the rest

[Pete Elite]

I've been having a bit of slipping and clunky changes on my Autobox which I've been putting down to an overheating problem i had(hopefully solved now)as it only seemed to do it when the engine got very hot(over 100 degrees)but i thought I'd check the fluid so did it as stated in the how to section but only managed to get about 3/4 of a litre in and when lowered car it still didn't come out .
  Whats the best way to put the fluid in as the bottle i got has only got a short pull out tube and you can't get the bottle high enough to pump it in .

              Any suggestions appreciated .

trie using a bit of hose pipe on the end of your bottle jack the car up stick it in lower it then squirt away  u know the rest

   Thanks Sparky I'll give that a go .

[spikerz]

i got a bit clear pipe from b&q that fits perfect into the bottle nozzle and into the gearbox filler.about 10mm diameter and only about a pound a meter.about 40cm length is enough to get the bottle high enough to squeeze it in with no mess.

[MutantCav]

You want a length of hose long enough to be able to pour the fluid into the box while standing...then a funnel slotted in the end to get the fluid into the tube and be careful not to let the hose come out of the filler hole while pouring lol

[unlucky alf]

have you been peeking in my garage MC after all the fun i had i got it down to a fine art

[Pete Elite]

Thanks all for your suggestions.
 I managed to get a length of clear pipe which fitted snugly in the bottle's tube, certainly makes life easier .

[MutantCav]

I may have cheated and copied the technique from someone on here Alf  Works well though...have my tube/funnel in the garage just in case its needed although doubt it will be on my manual Zafira now lol