Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[shay oneill]

hi does any1 no wer i could get a clutch bleeder nipple as ive snaped mine in half inside the housing

[rustym95]

i have 1 here but they dont cost alot think mine cost 50p, standard nipple. most motor spares have them.

[Andy B]

hi does any1 no wer i could get a clutch bleeder nipple as ive snaped mine in half inside the housing

I think you have more of a problem getting the old nipple out rather than getting a new one.     

[rustym95]

u can get it undun with extractor they dont cost alot,

[Andy B]

u can get it undun with extractor they dont cost alot,

So ... the hex head wasn't enough to remove the nipple, but an Eazyout will be .......  :-/  :-/  :-/. Depends how rusted in it is.     

[rustym95]

you must of had an old 1 mine is stainless steal, and old 1 was alumium they do snap off but easy to get out 

[Andy B]

you must of had an old 1 mine is stainless steal, and old 1 was alumium they do snap off but easy to get out 

I was just talking about nipples & easyouts in general ooooer!     My Omega doesn't have need of clutch slaves etc having the optimum number of pedals already!     

[shay oneill]

problemm is ive totaled the nipple housing to and need a replacement and dont no wer to get 1

[rustym95]

looks like you will be needing a scap yard then and get a second hand 1.

[shay oneill]

what would the proper name for it b??

[rustym95]

haveyou damaged the housing, or is it the niple thred?

[shay oneill]

both 

[rustym95]

looks like u dun a good un, u will need to get a second hand gear box housing, if not good at mec better get a hole 1 and just swop it over, easy to swop over not like frunt drive, or  just had a thourght, remove the gearbox housing, im sure if u take it off and remove the slave think its fixed inside and change the slave that should fix it

[Andy B]

looks like u you dun done  a good un, u will need to get a second hand gear box housing, if not good at mec better get a hole 1 and just swop it over, easy to swop over not like frunt front drive, or  just had a thourght, remove the gearbox housing, im sure if u take it off and remove the slave think its fixed inside and change the slave that should fix it

etc etc


Rusty
I don't mean to be awkward but ........ your posts are bloody difficult to read. Have a go at leaving the 't xt  spk' for your phone and run it through a spell checker of some kind.       

[rustym95]

sorry im dislacsick, and spell cheak dont work here.