Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: 1 [2]  All   Go Down

Author Topic: Serious inner front tyre wear?  (Read 4323 times)

0 Members and 1 Guest are viewing this topic.

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34119
  • Git!
    • View Profile
Re: Serious inner front tyre wear?
« Reply #15 on: 29 September 2009, 08:10:30 »
Quote
The way the camber is adjusted it can only go "off" if you sideswipe a kerb so hard you would have bent something IMHO !!!

My guess is wishbones replacement  :)

I got mine from AutoVaux .. cost £125 for both, new bolts and delivery.

:)

Nah.....it can go 'off' as the suspension ages and the springs weaken.
Logged

markh1

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • surrey
  • Posts: 117
    • View Profile
Re: Serious inner front tyre wear?
« Reply #16 on: 29 September 2009, 08:57:16 »
I recently changed the front wishbones and droplinks and the passenger side wheel has got a bit too much camber. I am going to have it setup on Saturday, I will be interested to see how much difference it makes to the drive!
Logged
'98 Omega 3.0 Elite Manual - Slowly having most of running gear replaced
'98 TVR Cerbera 4.5 - completely rebuilt on new chassis

Boiler Man

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Sale, Manchester
  • Posts: 368
    • View Profile
Re: Serious inner front tyre wear?
« Reply #17 on: 29 September 2009, 09:41:30 »
Quote
Quote
The way the camber is adjusted it can only go "off" if you sideswipe a kerb so hard you would have bent something IMHO !!!


My guess is wishbones replacement  :)

I got mine from AutoVaux .. cost £125 for both, new bolts and delivery.

:)

Nah.....it can go 'off' as the suspension ages and the springs weaken.

So how could you find out if it's the Suspension or Springs Mark? :-/

and what can be done to correct it?
Logged
Omega 2.0 DTI GLS Estate 99 Gold & Omega 2.2 DTI CDX Estate 03 Silver. Just need a Bronze one now for the full set.

Boiler Man

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Sale, Manchester
  • Posts: 368
    • View Profile
Re: Serious inner front tyre wear?
« Reply #18 on: 01 October 2009, 17:33:05 »
Any chance Mark or someone, could advise on how to tell if the springs are shot? :-/ :-/
« Last Edit: 01 October 2009, 17:33:43 by Boiler_Man »
Logged
Omega 2.0 DTI GLS Estate 99 Gold & Omega 2.2 DTI CDX Estate 03 Silver. Just need a Bronze one now for the full set.

duggs

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Felixstowe
  • Posts: 1212
    • BMW 3.0 Sport
    • View Profile
Re: Serious inner front tyre wear?
« Reply #19 on: 01 October 2009, 17:48:06 »
Spooky !

I had EXACTLY the same problem about 2 weeks ago.

WISHBONES had had it.
Logged

seosamh

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • belfast
  • Posts: 74
    • View Profile
Re: Serious inner front tyre wear?
« Reply #20 on: 02 October 2009, 17:24:43 »
exactly the same as mine, on the drivers side, the inner edge of tyre was down to the steel wire, rest of tyre had great tread on..wishbone bushes on that side were truly gone
Logged

seosamh

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • belfast
  • Posts: 74
    • View Profile
Re: Serious inner front tyre wear?
« Reply #21 on: 02 October 2009, 17:32:45 »
what is CAMBER ?
Logged

Andy H

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Auckland
  • Posts: 5533
    • Mazda MPV
    • View Profile
Re: Serious inner front tyre wear?
« Reply #22 on: 02 October 2009, 17:51:45 »
Quote
what is CAMBER ?
It is a measure of whether the wheel leans in or out.

Positive camber is when the top of the wheel is further from the centreline of the car than the bottom.

Omega front wheels seem to have varying degrees of negative camber (which increases as the springs age and allow the car to settle and also as bushes wear).
Logged
"Deja Moo - The feeling that you've heard this bull somewhere before."

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34119
  • Git!
    • View Profile
Re: Serious inner front tyre wear?
« Reply #23 on: 02 October 2009, 21:43:43 »
Quote
Any chance Mark or someone, could advise on how to tell if the springs are shot? :-/ :-/

Springs age......its a fact and no real issue.

But, as they age the ride height falls slightly and the suspension dynamics change....and hence the camber goes out.

get it set to -1deg 10' and all will be good again.  :y
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34119
  • Git!
    • View Profile
Re: Serious inner front tyre wear?
« Reply #24 on: 02 October 2009, 21:44:44 »
Quote
exactly the same as mine, on the drivers side, the inner edge of tyre was down to the steel wire, rest of tyre had great tread on..wishbone bushes on that side were truly gone

Which would knock the camber out.....again, it really needs checking an setting correctly  :y
Logged

mic_k

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Telford shropshire
  • Posts: 35
    • View Profile
Re: Serious inner front tyre wear?
« Reply #25 on: 04 October 2009, 13:31:12 »
sorry guys for bump up but I dont want to start another thread with simmilar thing - cause mine starts to wear the passenger front tyre on the outside and pulling to that way all the time now ,slightly but pulling. its going even worse on bumpy road  - I can't manage to keep straigt direction -just playing from kerb to kerb  :( Its like finghting with mad cow  :o. are this wishbones as well ao something else like track rod ends? i tried to look there but there is no sign of any damage or wear except the tyre. suggestions?
Logged
Laser cows, like normal cows but with lasers
Pages: 1 [2]  All   Go Up
« previous next »
 

Page created in 0.012 seconds with 17 queries.