Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1]   Go Down

Author Topic: Ball park figure for parts V6 head gasket change  (Read 603 times)

0 Members and 1 Guest are viewing this topic.

Varche

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • middle of Andalucia
  • Posts: 14003
  • What is going to break next?
    • Golf Estate
    • View Profile
Ball park figure for parts V6 head gasket change
« on: 27 November 2009, 16:22:49 »
I am just trying to cost up the worst case scenario that my water loss problem is the head gasket and not HBV or oil cooler unions. Sometimes there are water stains down the side of the engine block near the rear of the engine above the oil filter.

Roughly how much are the parts (not inc oil and antifreeze) to do the job.? Head Gaskets, new bolts, sealing rings etc.

Are there any other parts that need replacing at the same time?   

Is it OK to use a pattern HBV e.g. off Ebay or are the VX ones recommended.

V
Logged
The biggest joke on mankind is that computers have started asking humans to prove that they aren’t a robot.

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34018
  • Git!
    • View Profile
Re: Ball park figure for parts V6 head gasket change
« Reply #1 on: 27 November 2009, 16:23:57 »
When where the cam cover gaskets last changed?
Logged

Varche

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • middle of Andalucia
  • Posts: 14003
  • What is going to break next?
    • Golf Estate
    • View Profile
Re: Ball park figure for parts V6 head gasket change
« Reply #2 on: 27 November 2009, 16:33:35 »
They were changed at an Opel dealer here in Spain about 3 and a half years ago.  Not done many miles since maybe 15 to 20k.

V
Logged
The biggest joke on mankind is that computers have started asking humans to prove that they aren’t a robot.

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34018
  • Git!
    • View Profile
Re: Ball park figure for parts V6 head gasket change
« Reply #3 on: 27 November 2009, 16:37:23 »
Quote
They were changed at an Opel dealer here in Spain about 3 and a half years ago.  Not done many miles since maybe 15 to 20k.

V

They may be ok then.

So

Bolts £20
Head gaskets £25
Exhaust manifold gaskets £14
Manifold to front pipe gaskets £10
Dowty washers £5
Rear coolant seal £1
Oil £12
Anti freeze £10
Oil filter £2
Cam seals - re use old
Cam cover seals - maybe re-use old

Extras (optional) -

Re-seal oil cooler plate
           Sealent - £7
           Metal washers - £4
Logged

tigers_gonads

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Kinston Upon Hull
  • Posts: 8610
  • Driving a Honda CR-V which doesn't smell of pee
    • Honda CR-V
    • View Profile
Re: Ball park figure for parts V6 head gasket change
« Reply #4 on: 27 November 2009, 18:40:52 »
got 24 stem seals
16 bolts
2 head gaskets
delivered  ( uk )

£54 from trechii ltd
01246 280863  :y

if you mention the forum or daz then you might get a discount  :y
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.013 seconds with 16 queries.