Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1]   Go Down

Author Topic: Omega V6 engine bay wiring  (Read 1356 times)

0 Members and 1 Guest are viewing this topic.

metroman

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 5
    • View Profile
Omega V6 engine bay wiring
« on: 17 December 2009, 16:38:48 »
I've just replaced the Thermostat on a V6 Omega B, on putting everything back together I've got a lonly plug, I'm sure I've missed something?? the plug is coming from the loom on the N/S bank near the dipstick, I cant find a wire to plug into it and I have totally forgotten if it was or not plugged in before, a picture could be really handy, it's the short Male plug that comes from the loom???? just hope it's not under the manifold!!!
Logged

Bionic

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Leicester
  • Posts: 1300
  • Why drive anything else?
    • 1999 F/L 3.0 Elite saloon
    • View Profile
Re: Omega V6 engine bay wiring
« Reply #1 on: 17 December 2009, 16:41:54 »
Sure its not from the bonnett open sensor for the alarm?
Logged
Too old to suffer, too young to die!
Autobahnstormers Trade Cards now accepted at Drive Leicester and at Marshall's Vauxhall.

metroman

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 5
    • View Profile
Re: Omega V6 engine bay wiring
« Reply #2 on: 17 December 2009, 16:42:44 »
plugged in, not that one?
Logged

andyc

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Norfolk
  • Posts: 1273
    • View Profile
Re: Omega V6 engine bay wiring
« Reply #3 on: 17 December 2009, 16:46:58 »
Knock sensor? and the harness from the sensor has dropped down the side of the block


Andy
Logged
Iceni Automotive. Classic Vauxhall/Opel Specialist. Service, Repairs, Restoration
Thetford. Norfolk

JamesV6CDX

  • Omega Queen
  • *****
  • Offline Offline
  • Gloucestershire/Buckinghamshire
  • Posts: 16640
    • Omega 3.2 Retail MV6 LPG
    • View Profile
Re: Omega V6 engine bay wiring
« Reply #4 on: 17 December 2009, 16:48:49 »
Cam sensor

Knock Sensor

Throttle Position Sensor

Logged

tigers_gonads

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Kinston Upon Hull
  • Posts: 8610
  • Driving a Honda CR-V which doesn't smell of pee
    • Honda CR-V
    • View Profile
Re: Omega V6 engine bay wiring
« Reply #5 on: 17 December 2009, 17:23:53 »
does it start ?
Logged

tigers_gonads

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Kinston Upon Hull
  • Posts: 8610
  • Driving a Honda CR-V which doesn't smell of pee
    • Honda CR-V
    • View Profile
Re: Omega V6 engine bay wiring
« Reply #6 on: 17 December 2009, 17:25:04 »
how many pins ?
Logged

metroman

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 5
    • View Profile
Re: Omega V6 engine bay wiring
« Reply #7 on: 17 December 2009, 17:53:06 »
to dark to count pins at mo, yes it does start and run, I know it's not the cam sensor ( that plugs at the end of the loom ), and it's not the TPS either, I'm actually thinking knock sensor mite be a option, I'm going to have a look in the morning, I blame it for being cold
Logged

tigers_gonads

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Kinston Upon Hull
  • Posts: 8610
  • Driving a Honda CR-V which doesn't smell of pee
    • Honda CR-V
    • View Profile
Re: Omega V6 engine bay wiring
« Reply #8 on: 17 December 2009, 17:55:08 »
on the wiring cage that runs down the right hand side of the engine
where does it come out ?
front / mid or back of the cage ?
Logged

tigers_gonads

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Kinston Upon Hull
  • Posts: 8610
  • Driving a Honda CR-V which doesn't smell of pee
    • Honda CR-V
    • View Profile
Re: Omega V6 engine bay wiring
« Reply #9 on: 17 December 2009, 17:55:34 »
any eml light ?
Logged

mantahatch

  • Guest
Re: Omega V6 engine bay wiring
« Reply #10 on: 17 December 2009, 18:01:34 »
Back of the idle control valve ? silver thingy on n/s of plenum.
Logged

metroman

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 5
    • View Profile
Re: Omega V6 engine bay wiring
« Reply #11 on: 17 December 2009, 18:07:02 »
the easiest way to explain is where the main part of the loom heads towards the fusebox its underneath that, there is currently a EML light on ( code read it in the morning now ) but this maybe down to a problem on the cam sensor, it got caught on removal,
Logged

metroman

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 5
    • View Profile
Re: Omega V6 engine bay wiring
« Reply #12 on: 17 December 2009, 18:08:10 »
ICV all working fine and plugged in ( not that type of connector anyway )
Logged

tigers_gonads

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Kinston Upon Hull
  • Posts: 8610
  • Driving a Honda CR-V which doesn't smell of pee
    • Honda CR-V
    • View Profile
Re: Omega V6 engine bay wiring
« Reply #13 on: 17 December 2009, 18:09:01 »
read the codes and come back in morning mate  :y

should be a piece of pish then  :y
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.01 seconds with 17 queries.