Topic: Noisy heater fan bearing (Read 596 times)

smokingomega · « **on:** 02 January 2010, 11:16:24 »

Hi
I was wondering if there is any easy way of getting to my heater blower moter?
the problem is i think the bearings need a bit of a lube.
I`ve heared that they are a bit of a pig to get to
Cheers

RobG · « **Reply #1 on:** 02 January 2010, 11:24:06 »

Remove glovebox. Have a read of this.http://www.omegaowners.com/forum/YaBB.pl?num=1261507084

dbug · « **Reply #2 on:** 02 January 2010, 13:18:54 »

Removing blower motor is a pain in the rse - top two bolts have to be removed (& refitted) by feel! You need to drop glovebox out, remove trunking tray, undo fixing bolts disconnect electrics and then waggle the b*gger out! As Hayes says "refitting is the reverse of removal"

Took me a couple of hours to swap blower motors on the Estate whilst standing on my head under the dash!!

smokingomega · « **Reply #3 on:** 02 January 2010, 18:05:04 »

I`m not actually wanting it out all I need to do is just lube the bearings. it has that dry metalic sound now an then an i think a squirt of oil should sort it out.
Thanks for the help

dbug · « **Reply #4 on:** 03 January 2010, 16:00:13 »

The Estate blower had noisy bearings - swapped it for another blower courtesy of an OOF breaker. Cannot see a way to lube bearings on this!! Think you will end up taking it out mate

News:

Author Topic: Noisy heater fan bearing (Read 596 times)

smokingomega

Noisy heater fan bearing

RobG

Re: Noisy heater fan bearing

dbug

Re: Noisy heater fan bearing

smokingomega

Re: Noisy heater fan bearing

dbug

Re: Noisy heater fan bearing