Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: 1 [2] 3  All   Go Down

Author Topic: help ,, gear box noise !  (Read 2656 times)

0 Members and 1 Guest are viewing this topic.

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 33982
  • Git!
    • View Profile
Re: help ,, gear box noise !
« Reply #15 on: 11 January 2010, 20:35:22 »

Quote
so would the SWITCHOVER SOLENOID VALVE being broken or whatever cause the car to have random missfire when up at speed  ??

and i will have to have a look in the morning i cant see anything outside lol but will let you know..

and would this be what i need ??   http://cgi.ebay.co.uk/VAUXHALL-OPEL-OMEGA-VECTRA-SWITCHOVER-SOLENOID-VALVE_W0QQitemZ170264511099QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item27a48e427b


and just a thankyou to everyone for the help im getting :)

When was the fuel filter last changed?
Logged

deejaywardy

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Grantham
  • Posts: 101
    • View Profile
Re: help ,, gear box noise !
« Reply #16 on: 11 January 2010, 20:41:17 »

Quote
Quote
so would the SWITCHOVER SOLENOID VALVE being broken or whatever cause the car to have random missfire when up at speed  ??

and i will have to have a look in the morning i cant see anything outside lol but will let you know..

and would this be what i need ??   http://cgi.ebay.co.uk/VAUXHALL-OPEL-OMEGA-VECTRA-SWITCHOVER-SOLENOID-VALVE_W0QQitemZ170264511099QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item27a48e427b


and just a thankyou to everyone for the help im getting :)

When was the fuel filter last changed?


im not to sure i have only had the car a month ,, well what happens is normally at about 70+ mph or hardish acceleration the car starts to missfire and lose power and will continue to missfire till the car is pulled over switched off but when started again it will run fine untill up at speed again or hardish acceleration :S ??
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 33982
  • Git!
    • View Profile
Re: help ,, gear box noise !
« Reply #17 on: 11 January 2010, 20:45:10 »

Seen that before with a clogged fuel filter.....due to the miss fire the ecu shuts 1 or 2 cylinders down to protect the cats....this gets reset on a re-start
Logged

deejaywardy

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Grantham
  • Posts: 101
    • View Profile
Re: help ,, gear box noise !
« Reply #18 on: 11 January 2010, 20:46:47 »

Quote
Seen that before with a clogged fuel filter.....due to the miss fire the ecu shuts 1 or 2 cylinders down to protect the cats....this gets reset on a re-start


well i shall get a new fuel filter aswell ,, my car also runs on auto gas if that makes any difference ??
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 33982
  • Git!
    • View Profile
Re: help ,, gear box noise !
« Reply #19 on: 11 January 2010, 20:47:15 »

Quote
Quote
Seen that before with a clogged fuel filter.....due to the miss fire the ecu shuts 1 or 2 cylinders down to protect the cats....this gets reset on a re-start


well i shall get a new fuel filter aswell ,, my car also runs on auto gas if that makes any difference ??

Does it do this on gas, petrol or both?
Logged

deejaywardy

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Grantham
  • Posts: 101
    • View Profile
Re: help ,, gear box noise !
« Reply #20 on: 11 January 2010, 20:53:26 »

Quote
Quote
Quote
Seen that before with a clogged fuel filter.....due to the miss fire the ecu shuts 1 or 2 cylinders down to protect the cats....this gets reset on a re-start


well i shall get a new fuel filter aswell ,, my car also runs on auto gas if that makes any difference ??

Does it do this on gas, petrol or both?


i think when it did it it was running on petrol becasue it dont run on gas till it warms up enough ,, i think i tried to put it on gas when it was missfireing and still did it ,, im not 100% sure if it was runnin on gas any other times its done it ,, what would it be if it was doin it on gas aswell ???
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 33982
  • Git!
    • View Profile
Re: help ,, gear box noise !
« Reply #21 on: 11 January 2010, 21:01:09 »

If gas as well I would expect it to be ignition based but, it should report miss fire codes then....if petrol only the fuel filter sounds likely and once the miss fire has started and the injector is shut down then the lpg would do the same (as the LPG ecu's simply modify the petrol injector signal)
Logged

deejaywardy

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Grantham
  • Posts: 101
    • View Profile
Re: help ,, gear box noise !
« Reply #22 on: 11 January 2010, 21:05:54 »

Quote
If gas as well I would expect it to be ignition based but, it should report miss fire codes then....if petrol only the fuel filter sounds likely and once the miss fire has started and the injector is shut down then the lpg would do the same (as the LPG ecu's simply modify the petrol injector signal)


well i put it on a code reader a few days after it had started doing it ,, and it did come up with missfire codes 2 cylenders i think it said ,, i cleared the errors with it , but still did it with speed or accel ,, so if its ignition based what would that probably be ??
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 33982
  • Git!
    • View Profile
Re: help ,, gear box noise !
« Reply #23 on: 11 January 2010, 21:12:17 »

Quote
Quote
If gas as well I would expect it to be ignition based but, it should report miss fire codes then....if petrol only the fuel filter sounds likely and once the miss fire has started and the injector is shut down then the lpg would do the same (as the LPG ecu's simply modify the petrol injector signal)


well i put it on a code reader a few days after it had started doing it ,, and it did come up with missfire codes 2 cylenders i think it said ,, i cleared the errors with it , but still did it with speed or accel ,, so if its ignition based what would that probably be ??

Coil pakc possibly or failed cam cover gaskets.....or or or.....have a look at the fuel filter first though as if its crappy looking, rule it out by changing it
Logged

deejaywardy

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Grantham
  • Posts: 101
    • View Profile
Re: help ,, gear box noise !
« Reply #24 on: 11 January 2010, 21:18:40 »

Quote
Quote
Quote
If gas as well I would expect it to be ignition based but, it should report miss fire codes then....if petrol only the fuel filter sounds likely and once the miss fire has started and the injector is shut down then the lpg would do the same (as the LPG ecu's simply modify the petrol injector signal)


well i put it on a code reader a few days after it had started doing it ,, and it did come up with missfire codes 2 cylenders i think it said ,, i cleared the errors with it , but still did it with speed or accel ,, so if its ignition based what would that probably be ??

Coil pakc possibly or failed cam cover gaskets.....or or or.....have a look at the fuel filter first though as if its crappy looking, rule it out by changing it


well i will get a fuel filter anyway better to have a new 1 :)

and the rocker cover gaskets are leaking so would that cause it ??

i have new gaskets for it just not had chance to fit them yet ,, and i guess if both of those fail coil pack :( lol
Logged

davethediver

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Blackburn, Lancs.
  • Posts: 1376
    • View Profile
Re: help ,, gear box noise !
« Reply #25 on: 11 January 2010, 23:37:29 »

Make sure the gaskets are genuine VX and not pattern ones or you'll be changing them again in a couple of weeks :y
Logged
“It is not necessary to understand things in order to argue about them.”
P.A. Caron de Beaumarchais

deejaywardy

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Grantham
  • Posts: 101
    • View Profile
Re: help ,, gear box noise !
« Reply #26 on: 12 January 2010, 09:00:05 »

Quote
Make sure the gaskets are genuine VX and not pattern ones or you'll be changing them again in a couple of weeks :y

i got given the gaskest so not sure if they are vx ones or not ,,, wheres best place to get some gen vx ones at a fair price ??

and whatelse would i need if im replacing the RC gaskets any other gaskets or oat ?
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: help ,, gear box noise !
« Reply #27 on: 12 January 2010, 09:22:06 »

Quote
Quote
Make sure the gaskets are genuine VX and not pattern ones or you'll be changing them again in a couple of weeks :y

i got given the gaskest so not sure if they are vx ones or not ,,, wheres best place to get some gen vx ones at a fair price ??

and whatelse would i need if im replacing the RC gaskets any other gaskets or oat ?
http://www.omegaowners.com/forum/YaBB.pl?num=1152564281 :y
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

deejaywardy

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Grantham
  • Posts: 101
    • View Profile
Re: help ,, gear box noise !
« Reply #28 on: 12 January 2010, 09:41:36 »

thanks .

so can anyone give me a price for all these and where to order it all from :)

    * Rocker gaskets
    * O-rings
    * Gasket, Inlet bridge to head 2 off
    * Gasket, Inlet to Inlet bridge 3 off
    * Gasket, Inlet to Plenum O rings 6 off
    * Sealent, Black 1 off
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 33982
  • Git!
    • View Profile
Re: help ,, gear box noise !
« Reply #29 on: 12 January 2010, 09:52:04 »

Quote
thanks .

so can anyone give me a price for all these and where to order it all from :)

    * Rocker gaskets
    * O-rings
    * Gasket, Inlet bridge to head 2 off
    * Gasket, Inlet to Inlet bridge 3 off
    * Gasket, Inlet to Plenum O rings 6 off
    * Sealent, Black 1 off

You didnlt read the guide did you.....you dont need all those gaskets
Logged
Pages: 1 [2] 3  All   Go Up
 

Page created in 0.013 seconds with 17 queries.