Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: 1 [2] 3 4  All   Go Down

Author Topic: Crank Shaft Sensor problem - is this right?  (Read 4480 times)

0 Members and 1 Guest are viewing this topic.

Andy H

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Auckland
  • Posts: 5532
    • Mazda MPV
    • View Profile
Re: Crank Shaft Sensor problem - is this right?
« Reply #15 on: 20 December 2009, 13:41:26 »
Omega V6 cylinder head gaskets fail in one of two ways
1. coolant seeping through rotten gaskets and running down outside of engine
2. failure of 'fire ring' part of head gasket causing exhaust gases to blow into coolant passage when running (and coolant into combustion chamber when stopped)

If it is oil then it is weeping cam cover seals caused by blocked breathers pressurising the engine.
« Last Edit: 20 December 2009, 13:42:28 by andyh »
Logged
"Deja Moo - The feeling that you've heard this bull somewhere before."

Koomorph

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • South London/Surrey
  • Posts: 163
    • View Profile
Re: Crank Shaft Sensor problem - is this right?
« Reply #16 on: 20 December 2009, 13:56:09 »
Right -thanks Andy - I'm quite sure it's oil that is leaking - but will double check that it wasn't coolant on the ground that I saw. I guess I should keep an eye now on the coolant level? If coolant was getting into the combustion chamber I'm guessing it wouldn't run very smoothly....

Logged

richard1967

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Swindon
  • Posts: 57
    • View Profile
Re: Crank Shaft Sensor problem - is this right?
« Reply #17 on: 20 December 2009, 16:04:29 »
Hi Guys.  I think Ive got the same problem as the first poster.  I get the Car with a Spanner symbol appearing on the Dashboard.  I drive an 02 Auto 2.2.  I can reset it by turning the ignition off then on. The light then disapears, before reappearing when Ive been for a drive typically arounf town when im doing 30 MPH or so.  I wondered how easy it is to replace the sensor myself. Ive tried looking at the manuals on here to find photos or information, but  I can see anything? Is it a straight forward job, and would you recomend that I order the part from my VX garage? Thanks guys
Logged

Koomorph

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • South London/Surrey
  • Posts: 163
    • View Profile
Re: Crank Shaft Sensor problem - is this right?
« Reply #18 on: 20 December 2009, 17:00:43 »
Hi Richard

As advised by the helpful members on this forum - do the pedal test as decribed here: http://www.omegaowners.com/forum/YaBB.pl?num=1189022687

and report back what codes you have. It may not work on a 2.2 though - can't be sure of that.

Crank sensor replacement guide can be found here: http://www.omegaowners.com/forum/YaBB.pl?num=1174321688




Logged

richard1967

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Swindon
  • Posts: 57
    • View Profile
Re: Crank Shaft Sensor problem - is this right?
« Reply #19 on: 20 December 2009, 17:09:18 »
Hi Koomorph!
Ive tried the pedal trick and it doesnt work. Ive just ordered a diagnostic code reader, so I will have to wait for that before I know the code.  Replacing the Crank sensor and the cable seems to be straight forward??
Logged

Jimbob

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Chester / Flintshire
  • Posts: 24520
  • I like traffic lights, but only when they're green
    • E250 Est / Golf GTI
    • View Profile
Re: Crank Shaft Sensor problem - is this right?
« Reply #20 on: 20 December 2009, 17:10:36 »
Quote
Hi Koomorph!
Ive tried the pedal trick and it doesnt work. Ive just ordered a diagnostic code reader, so I will have to wait for that before I know the code.  Replacing the Crank sensor and the cable seems to be straight forward??


your 2.2 may well be cam sensor not crank  :y
Logged

richard1967

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Swindon
  • Posts: 57
    • View Profile
Re: Crank Shaft Sensor problem - is this right?
« Reply #21 on: 20 December 2009, 17:49:07 »
Oke Doke. Cam Sensor, is there a guide to that on here JimBob?  Just wandered out and had a quick look under the bonnet, and Ive got a small oil leak as well! Il upload a photo when i can work out how to do it  Would this be connected to the problem with the dashboard light?
Heres the photos of the oil leak
[url][/urlhttp://i38.photobucket.com/albums/e144/richard1967photos/OMEGA/photo2.jpg]

<a href="http://s38.photobucket.com/albums/e144/richard1967photos/OMEGA/?action=view&current=photo1.jpg" target="_blank"><img src="http://i38.photobucket.com/albums/e144/richard1967photos/OMEGA/photo1.jpg" border="0" alt="OMEGA"></a>
« Last Edit: 20 December 2009, 18:15:26 by richard1967 »
Logged

Andy H

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Auckland
  • Posts: 5532
    • Mazda MPV
    • View Profile
Re: Crank Shaft Sensor problem - is this right?
« Reply #22 on: 20 December 2009, 18:23:15 »
Quote
Right -thanks Andy - I'm quite sure it's oil that is leaking - but will double check that it wasn't coolant on the ground that I saw. I guess I should keep an eye now on the coolant level? If coolant was getting into the combustion chamber I'm guessing it wouldn't run very smoothly....

People have reported running on 4 or 5 cylinders immediately after starting.

Theoretically, if the quantity of coolant in the cylinder exceeds the combustion chamber volume at TDC then hydraulic lock could result in a bent conrod. The coolant loss and other mysterious cooling ailments usually become impossible to ignore before that stage is reached though.
Logged
"Deja Moo - The feeling that you've heard this bull somewhere before."

tunnie

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Surrey
  • Posts: 37547
    • Zafira Tourer & BMW 435i
    • View Profile
Re: Crank Shaft Sensor problem - is this right?
« Reply #23 on: 20 December 2009, 18:25:31 »
Richard, fixed your pictures. (put the URL - the http, inside image brackets) Press the image button when posting that makes IMG but in brackets



« Last Edit: 20 December 2009, 18:26:08 by tunnie »
Logged

richard1967

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Swindon
  • Posts: 57
    • View Profile
Re: Crank Shaft Sensor problem - is this right?
« Reply #24 on: 20 December 2009, 18:27:38 »
Thanks Tunnie I appreciate it.  I'll make sure I do it right next time :y
Logged

tunnie

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Surrey
  • Posts: 37547
    • Zafira Tourer & BMW 435i
    • View Profile
Re: Crank Shaft Sensor problem - is this right?
« Reply #25 on: 20 December 2009, 18:27:53 »
looking at that picture you have a 2.2/2.0? There is a gasket at the bottom of that pipe, easily replaced.
« Last Edit: 20 December 2009, 18:28:36 by tunnie »
Logged

richard1967

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Swindon
  • Posts: 57
    • View Profile
Re: Crank Shaft Sensor problem - is this right?
« Reply #26 on: 20 December 2009, 18:32:16 »
Hi Tunnie,

Yes Ive got a 2.2 Auto on an 02 Plate.  Im sorry Im being a real daft so and so gents and ladies.  Any ideas what the part number is for the gasket?.  Do I need to take any special precautions when replacing it? ( Besides putting my brain in gear!) Just a question of unbolting the pipe, and taking the gasket out and then putting the new one in?
Logged

tunnie

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Surrey
  • Posts: 37547
    • Zafira Tourer & BMW 435i
    • View Profile
Re: Crank Shaft Sensor problem - is this right?
« Reply #27 on: 20 December 2009, 18:33:33 »
no idea on part number sorry, but when you replace and clean, do the whole breather system at the same time  :y
Logged

richard1967

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Swindon
  • Posts: 57
    • View Profile
Re: Crank Shaft Sensor problem - is this right?
« Reply #28 on: 20 December 2009, 18:37:35 »
Ok, Il have a look at breather systems on here in a mo.  Any thoughts on the Cam sensor at all?
Logged

tunnie

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Surrey
  • Posts: 37547
    • Zafira Tourer & BMW 435i
    • View Profile
Re: Crank Shaft Sensor problem - is this right?
« Reply #29 on: 20 December 2009, 18:39:24 »
wait till your code reader arrives, and check the codes, but crank sensors on the 2.2 are fairly bullet proof, its the cam sensors that go. Mine went at around 100k, make sure you replace with genuine part.
Logged
Pages: 1 [2] 3 4  All   Go Up
« previous next »
 

Page created in 0.022 seconds with 18 queries.