Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Boxvictor]

Hi does anyone know where a can get a diagram of the full EGR System (full plumbing) for my 2.2 Dti please

[unlucky mark mv6]

Hi does anyone know where a can get a diagram of the full EGR System (full plumbing) for my 2.2 Dti please

Whats up with it mate.

[Boxvictor]

hi im not certain it plumbed in right, keeps going into limp home mode and coming up with
P0400 Critical system malfunction2
which i think maybe egr related, just trying to find out if its connected right, so i can eliminate that as the cause
Cheers Phil

[unlucky mark mv6]

hi im not certain it plumbed in right, keeps going into limp home mode and coming up with
P0400 Critical system malfunction2
which i think maybe egr related, just trying to find out if its connected right, so i can eliminate that as the cause
Cheers Phil

Just go to vx and get a blanking plate for itif you think its giving you greif,but leave the wiring plugged in,job done all for the cost of £2.50 or so.

[Boxvictor]

Hi,thank for the advice, just had it code read again and now its coming up with 4 Fault codes
P0100 critical systems malfunction 1
P0400 Critical systems malfunction 1
P1635 glow Device General Error(Changed Heater plugs and Module/relay)
P1590 Engine Running signal low Voltage (Changed Battery and alternator)
Engine will only rev to a maximum of 2500 rpm,

Gonna try an Egr Blanking plate next i think 
Cheers Phil