Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: rear blind problem  (Read 731 times)

0 Members and 1 Guest are viewing this topic.

dbr

  • Intermediate Member
  • ***
  • Offline Offline
  • north east.
  • Posts: 358
    • 1997. 2.5CD petrol
    • View Profile
rear blind problem
« on: 05 February 2010, 20:46:53 »
Rear blind goes up ok, but stops after a few inches going down. There's lots of  'clicking' then after about 10secs it stops. Could I adjust something or will it be another motor?
« Last Edit: 05 February 2010, 20:58:51 by hotel21 »
Logged

puffa

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Southampton, UK
  • Posts: 262
    • View Profile
Re: rear
« Reply #1 on: 05 February 2010, 20:50:35 »
ouch, sounds like the motor, possible there a couple of teeth missing on the main drive cog, not a cheap repair either.... good luck...

one thing to try is with someone else pressing the button  gently push the blind when it stops if it starts again then it is probably the missing teeth, I have had x2 motors now that have done this !!!!

Steve

« Last Edit: 05 February 2010, 20:51:36 by puffa »
Logged
Previously owned 2.5 v6 Reflection

dbr

  • Intermediate Member
  • ***
  • Offline Offline
  • north east.
  • Posts: 358
    • 1997. 2.5CD petrol
    • View Profile
Re: rear
« Reply #2 on: 05 February 2010, 20:55:16 »
Quote
ouch, sounds like the motor, possible there a couple of teeth missing on the main drive cog, not a cheap repair either.... good luck...

one thing to try is with someone else pressing the button  gently push the blind when it stops if it starts again then it is probably the missing teeth, I have had x2 motors now that have done this !!!!

Steve

yes that method works to get it down. Sounds like another motor or sticking with the push.....its cheaper.
Logged

Turk

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Llanelli, Wales
  • Posts: 4029
    • 2.5td, H-D XL1200
    • View Profile
Re: rear
« Reply #3 on: 05 February 2010, 21:01:33 »
I had the same on my previous Elite. Mine was the runners sticking in the tracks. One of the pivoting connections had broken and it was causing the sliders to twist enough to jam.
Logged
Only a biker truly understands why a dog sticks it's head out of the window of a moving car.
Pages: [1]   Go Up
« previous next »
 

Page created in 0.041 seconds with 21 queries.