Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Martin_1962]

The one next to the servo, connected to the small bore pipes, it has snapped aghhh!!!!!!!!!

[Martin_1962]

oneway valve with a small spigot off it

[Martin_1962]

Drilled out, glued in BIC pen centre, glued into pipe and sealed with silicon sealer, this should hold for now I hope.

[Martin_1962]

[JamesV6CDX]

Drilled out, glued in BIC pen centre, glued into pipe and sealed with silicon sealer, this should hold for now I hope.

Good Bodge 

[Bionic]

Mine has been 'bodged' just like that for years without any problems. They should make them a bit better instead of the weak crap they have used. Obviously intentional to get us to buy yet more parts at dealer costs! Sooner or later I will definitely get around to getting a new one though, probably even both! Even nif I do I will reinforce them before fitting with an nice overcoat of 2pack!
GudLuk

[Marks DTM Calib]

I think they are more than robust enough....you got to be pretty heavy handed to break them.

You can warm the servo pipe up and change just the valve section