Topic: occasional rubbing noise (Read 475 times)

rickmv6 · « **on:** 12 April 2010, 20:56:27 »

hi i have changed my cambelt on my omega 3.0 auto about 700 miles ago all seemed well until a couple of days ago when i noticed a slight noise its only there on low revs it sounds like something is rubbing on a belt.its not there all the time i found water pump to be a bit noisy so changerd that but noise is still there. when engine has been sitting for about 10 mins it has a noisy tappet which goes quiet again could this make a whirry noise on slow revs or am i missing the point .. hope someone can help as i am lost now

thanks rick

cem_devecioglu · « **Reply #1 on:** 12 April 2010, 21:02:50 »

worth checking the tensioner imo.. my tensioner give up at a very short distance after the change :-/

rickmv6 · « **Reply #2 on:** 12 April 2010, 21:05:26 »

i have taken the belt back off and everything seems nice and tight still the bearings dont seem loose or noisy i fitted a full kit so was all new

cem_devecioglu · « **Reply #3 on:** 12 April 2010, 21:08:45 »

Quote

i have taken the belt back off and everything seems nice and tight still the bearings dont seem loose or noisy i fitted a full kit so was all new

so was mine .. noises what wasnt there before tells something is wrong..

News:

Author Topic: occasional rubbing noise (Read 475 times)

rickmv6

occasional rubbing noise

cem_devecioglu

Re: occasional rubbing noise

rickmv6

Re: occasional rubbing noise

cem_devecioglu

Re: occasional rubbing noise