Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: 1 [2]  All   Go Down

Author Topic: 3.2 V6 Crankshaft bolt removal  (Read 2116 times)

0 Members and 2 Guests are viewing this topic.

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 33981
  • Git!
    • View Profile
Re: 3.2 V6 Crankshaft bolt removal
« Reply #15 on: 20 April 2010, 09:43:25 »
Yes, that would work ok.....the Vx tool locks onto the alternator bolts
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39728
    • ML350 TDM SmartRoadster
    • View Profile
Re: 3.2 V6 Crankshaft bolt removal
« Reply #16 on: 20 April 2010, 09:46:27 »
Quote
....
Lol, I am assuming that a joke ....

No :-? You're tightening the back of the bolt head up against the front face of the pulley when yoou torque it up. If the bolt had is no longer there .... you've now just got a threaded stud in the end of the crank.
Logged

V6Astra F

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Heidelberg , South Africa
  • Posts: 115
  • 3.2 V6 Powered Kadett
    • View Profile
Re: 3.2 V6 Crankshaft bolt removal
« Reply #17 on: 20 April 2010, 09:47:32 »
Great !! Will keep you guys posted , just worried that it might get worse . Or is it normal for it to be weeping as mutch as mine is at the moment ?
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 33981
  • Git!
    • View Profile
Re: 3.2 V6 Crankshaft bolt removal
« Reply #18 on: 20 April 2010, 10:31:54 »
Quote
Quote
....
Lol, I am assuming that a joke ....

No :-? You're tightening the back of the bolt head up against the front face of the pulley when yoou torque it up. If the bolt had is no longer there .... you've now just got a threaded stud in the end of the crank.

Yeh.........and how are you now going to secure your crank sprocket?

Your bolt is knackerd, the remains of your old bolt are to short to form a stud.
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39728
    • ML350 TDM SmartRoadster
    • View Profile
Re: 3.2 V6 Crankshaft bolt removal
« Reply #19 on: 20 April 2010, 11:07:04 »
Quote
Quote
Quote
....
Lol, I am assuming that a joke ....

No :-? You're tightening the back of the bolt head up against the front face of the pulley when yoou torque it up. If the bolt had is no longer there .... you've now just got a threaded stud in the end of the crank.

Yeh.........and how are you now going to secure your crank sprocket?

Your bolt is knackerd, the remains of your old bolt are to short to form a stud.

I was agreeing with the method of removal, not whether you'd be able to re-use anything of what you've just ground off.
Logged

JamesV6CDX

  • Omega Queen
  • *****
  • Offline Offline
  • Gloucestershire/Buckinghamshire
  • Posts: 16628
    • Omega 3.2 Retail MV6 LPG
    • View Profile
Re: 3.2 V6 Crankshaft bolt removal
« Reply #20 on: 20 April 2010, 16:38:36 »
I have a perfect tool custom made for this job.... you're welcome to borrow if, if you promise I'll get it back...  :y
Logged

V6Astra F

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Heidelberg , South Africa
  • Posts: 115
  • 3.2 V6 Powered Kadett
    • View Profile
Re: 3.2 V6 Crankshaft bolt removal
« Reply #21 on: 21 April 2010, 10:31:35 »
Quote
I have a perfect tool custom made for this job.... you're welcome to borrow if, if you promise I'll get it back...  :y

Wow thats a very kind of you  :y , pitty im in South Africa thou . Have started making one for me this side so hold thumbs for me . How long does it take to replace that seal if you get the pulley off , going to try it saturday after work .

Thanks :)
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39728
    • ML350 TDM SmartRoadster
    • View Profile
Re: 3.2 V6 Crankshaft bolt removal
« Reply #22 on: 21 April 2010, 10:48:39 »
Quote
Quote
I have a perfect tool custom made for this job.... you're welcome to borrow if, if you promise I'll get it back...  :y

Wow thats a very kind of you  :y , pitty im in South Africa thou . Have started making one for me this side so hold thumbs for me . How long does it take to replace that seal if you get the pulley off , going to try it saturday after work .

Thanks :)

Can't you see the face of seal with the outer part of the pulley removed?  :-/ I thought you could. If so, if you're just removing the seal, try drilling 3 or 4 small holes & screwing a self tapper in there. You now have something to ease the old seal out with.  :y
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 33981
  • Git!
    • View Profile
Re: 3.2 V6 Crankshaft bolt removal
« Reply #23 on: 21 April 2010, 10:49:46 »
No tlong.

Once the seal is out remove the metal bush that sits on the crank (the inner lip of the seal runs on this), clean it with very fine wet and dry and fit back the opposite way round so the new lip seal is not running in the original wear groove.
Logged

V6Astra F

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Heidelberg , South Africa
  • Posts: 115
  • 3.2 V6 Powered Kadett
    • View Profile
Re: 3.2 V6 Crankshaft bolt removal
« Reply #24 on: 21 April 2010, 11:04:48 »
Thanks guys will see if I can do it this weekend  :y
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 33981
  • Git!
    • View Profile
Re: 3.2 V6 Crankshaft bolt removal
« Reply #25 on: 21 April 2010, 11:19:17 »
Quote
Quote
Quote
Quote
....
Lol, I am assuming that a joke ....

No :-? You're tightening the back of the bolt head up against the front face of the pulley when yoou torque it up. If the bolt had is no longer there .... you've now just got a threaded stud in the end of the crank.

Yeh.........and how are you now going to secure your crank sprocket?

Your bolt is knackerd, the remains of your old bolt are to short to form a stud.

I was agreeing with the method of removal, not whether you'd be able to re-use anything of what you've just ground off.

And i was pointing out that you have not gained anything as you still need a tool to tighten the new bolt up  :y
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39728
    • ML350 TDM SmartRoadster
    • View Profile
Re: 3.2 V6 Crankshaft bolt removal
« Reply #26 on: 21 April 2010, 11:28:39 »
Quote
Quote
Quote
Quote
Quote
....
Lol, I am assuming that a joke ....

No :-? You're tightening the back of the bolt head up against the front face of the pulley when yoou torque it up. If the bolt had is no longer there .... you've now just got a threaded stud in the end of the crank.

Yeh.........and how are you now going to secure your crank sprocket?

Your bolt is knackerd, the remains of your old bolt are to short to form a stud.

I was agreeing with the method of removal, not whether you'd be able to re-use anything of what you've just ground off.

And i was pointing out that you have not gained anything as you still need a tool to tighten the new bolt up  :y

at last we agree! ;D  ;D  I have to admit that the last crank I did up was only a guestimate with a large knocking stick!  ::)  ::)
Logged
Pages: 1 [2]  All   Go Up
« previous next »
 

Page created in 0.013 seconds with 17 queries.