Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Elite Pete]

Never ben unplugged AFAIK

However perhaps both are on their way out.

As to car work - I have a great big white box in the way of my garage.

So where do you live Welung?

didnt you drop them when you did you head work?

No, and I can't even get a spanner on them.

Can't get car in working spot as the caravan is in the way.

I think Jimbob meant the downpipes. I normally drop the downpipes and disconnect the lambdas so I dont stretch the wiring, maybe thats the problem.

[Martin_1962]

Never dropped the downpipes and can't even get into my working on car spot as there is a great big white thing in the way

[tunnie]

Never dropped the downpipes and can't even get into my working on car spot as there is a great big white thing in the way

Could push it / tow it out of the way?  :-/

[Kevin Wood]

Never dropped the downpipes and can't even get into my working on car spot as there is a great big white thing in the way

Could push it / tow it out of the way?  :-/

Jaime'll soon move it. Have you got a can of petrol and a match? Oh, and a dustpan and brush.

Worth checking the live data before anything is cleared. In particular, look for activity on both Lambda sensors (might need to fast idle it for a minute to wake them up). Also check MAF reading at idle and fast idle, and see what the fuel trim values have done on both banks.

Kevin

[guncharmer]

If possible i would recommend swapping the maf over with another oof member(would volunteer if i were closer) just to rule it out even though its new.

 

[Welung666]

Never dropped the downpipes and can't even get into my working on car spot as there is a great big white thing in the way

Could push it / tow it out of the way?  :-/

Jaime'll soon move it. Have you got a can of petrol and a match? Oh, and a dustpan and brush.

Worth checking the live data before anything is cleared. In particular, look for activity on both Lambda sensors (might need to fast idle it for a minute to wake them up). Also check MAF reading at idle and fast idle, and see what the fuel trim values have done on both banks.

Kevin

I hope you're taking notes Martin

[Martin_1962]

If possible i would recommend swapping the maf over with another oof member(would volunteer if i were closer) just to rule it out even though its new.

 

Had a cheap one on now got a new Bosch - it has been threatening lambdas for a year - possibly LPG cooked

[Martin_1962]

Two lambdas have arrived for the grand total of £56

[Welung666]

Have you managed to fit them or do you still need me?

[Martin_1962]

Have you managed to fit them or do you still need me?

I will need you as I can't do them without dropping the centre sections as I won't fit.

Thanks

Martin

[Welung666]

I can do Saturday mid-morninng if that's any good to you? Is the Pikey palace still in the way?

[Martin_1962]

I can do Saturday mid-morninng if that's any good to you? Is the Pikey palace still in the way?

Thanks

I'll need to check with Sue, and also get gas.

How long does it have to cool for before you can fit them?

Will we need to get plenum off?

You are talking to the person who had to take the head off to get the B bolt off!!!!

[Welung666]

I can do Saturday mid-morninng if that's any good to you? Is the Pikey palace still in the way?

Thanks

I'll need to check with Sue, and also get gas.

How long does it have to cool for before you can fit them?

Will we need to get plenum off?

You are talking to the person who had to take the head off to get the B bolt off!!!!

About half an hour.

No, can do it from underneath.

[Martin_1962]

Will let you know tomorrow - what sort of times are OK over the W/E?

Thanks

Martin

[TheBoy]

Would unbolting that blooming great big ironing board that someone has bolted to the boot help?