Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[TheBoy]

Is the Silver Bullet enjoying its holidays in deepest Nottinghamshire?

[Entwood]

finally the thread is alive..

unlike the Silver Bullet   

[Marks DTM Calib]

Is the Silver Bullet enjoying its holidays in deepest Nottinghamshire?

Its fine, although its wheels have (temporarily) shrunk 

[Darth Loo-knee]

Is the Silver Bullet enjoying its holidays in deepest Nottinghamshire?

Its fine, although its wheels have (temporarily) shrunk 

 
Thieving tinker, typical of Robin Hood Country

[Marks DTM Calib]

Yes well, it lets me get its through its MOT and get new tyres at the same time 

[cem_devecioglu]

Is the Silver Bullet enjoying its holidays in deepest Nottinghamshire?

Its fine, although its wheels have (temporarily) shrunk 

 
Thieving tinker, typical of Robin Hood Country

 

[TheBoy]

Is the Silver Bullet enjoying its holidays in deepest Nottinghamshire?

Its fine, although its wheels have (temporarily) shrunk 

 
Thieving tinker, typical of Robin Hood Country

PMSL

I knew I should have put the locking nuts back in

[feeutfo]

You will all (well one might not be  ) be pleased to know that its not the cambelt.....all nicely timed, no sign of foreign objects and tension is spot on (Top Job Tony, the boy did well)

I have found one possible item that would cause a pretty loud clack and was disturbed.......

I will sort this and re-assemble for a test....my next stage of diagnosis requires the engine running anyway......I am not holding my breath on it but, it needs eliminating

? :-/

[Marks DTM Calib]

You will all (well one might not be  ) be pleased to know that its not the cambelt.....all nicely timed, no sign of foreign objects and tension is spot on (Top Job Tony, the boy did well)

I have found one possible item that would cause a pretty loud clack and was disturbed.......

I will sort this and re-assemble for a test....my next stage of diagnosis requires the engine running anyway......I am not holding my breath on it but, it needs eliminating

? :-/

Shall I tell......or shall I wait and see if it is the problem.....mmmmm...decisions, decisions.

[Elite Pete]

All quiet in ere innit.   

engine has to run to hear the knock

Its hush silence, could the useless student be right on the first reply 

And our survey says.........UHUUURRRRRGGGGGG. Never mind Tunnie

[cem_devecioglu]

You will all (well one might not be  ) be pleased to know that its not the cambelt.....all nicely timed, no sign of foreign objects and tension is spot on (Top Job Tony, the boy did well)

I have found one possible item that would cause a pretty loud clack and was disturbed.......

I will sort this and re-assemble for a test....my next stage of diagnosis requires the engine running anyway......I am not holding my breath on it but, it needs eliminating

? :-/

Shall I tell......or shall I wait and see if it is the problem.....mmmmm...decisions, decisions.

wait until you are sure.. 

[Marks DTM Calib]

Well I found a crack in the manifold to EGR pipe....

[feeutfo]

Well I found a crack in the manifold to EGR pipe....

ooooh, would be nice if it was that, right area, but....i reckon the noise is too loud and knocky for that, exhaust is usually "futty" ime, but here's hoping.
 

[Marks DTM Calib]

Well I found a crack in the manifold to EGR pipe....

ooooh, would be nice if it was that, right area, but....i reckon the noise is too loud and knocky for that, exhaust is usually "futty" ime, but here's hoping.
 

Indeed but, needs ruling out as clearly its a fault 

[feeutfo]

Well I found a crack in the manifold to EGR pipe....

ooooh, would be nice if it was that, right area, but....i reckon the noise is too loud and knocky for that, exhaust is usually "futty" ime, but here's hoping.
 

Indeed but, needs ruling out as clearly its a fault