Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: 17 Knock Signal Circuit 2  (Read 515 times)

0 Members and 3 Guests are viewing this topic.

riz

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Bangor, Co Down, Norn Irn
  • Posts: 5
  • Sorry Officer I thought it was a 7O zone.
    • View Profile
17 Knock Signal Circuit 2
« on: 30 May 2010, 15:47:25 »
hi Guys, new here. On my Vauxhall Omega 2.5 CDX automatic the ECU light has started to come on and off and I noticed a loss of power. I have done the paper clip test and came up with

17 Knock Signal Circuit 2

So I've been searching and came up with the engine knock means theres some kinda misfiring and the ECU retards the power output of the engine to compensate.

I wanna get this fixed as it can feel like taking off with traction control on when the light is on. It isn't on permanently but regularly enough to be a pain.

I can't seem to get much info on it on-line or from the manual, so if anyone can enlighten me on whats happening and how i should go about fixing it I'd be grateful.
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: 17 Knock Signal Circuit 2
« Reply #1 on: 30 May 2010, 15:54:45 »
Mounted on side of engine block. (#2 is pass side). Very rarely fail so first port of call would be to check the cabling/connections. And check your oil level
« Last Edit: 30 May 2010, 16:00:52 by RobG »
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

riz

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Bangor, Co Down, Norn Irn
  • Posts: 5
  • Sorry Officer I thought it was a 7O zone.
    • View Profile
Re: 17 Knock Signal Circuit 2
« Reply #2 on: 30 May 2010, 17:03:14 »
oil's at the max mark on cold.

not really sure what i'd be looking for :(
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106826
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: 17 Knock Signal Circuit 2
« Reply #3 on: 30 May 2010, 17:10:51 »
If camcovers have been done in last year or so, check the knock sensor cable hasn't got trapped under cam cover...
Logged
Grumpy old man

riz

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Bangor, Co Down, Norn Irn
  • Posts: 5
  • Sorry Officer I thought it was a 7O zone.
    • View Profile
Re: 17 Knock Signal Circuit 2
« Reply #4 on: 30 May 2010, 22:20:13 »
i'm a total newb under the bonnet :( do you know of any howto's that would show me what to look for and where to look for it in pictures?

Or maybe recommend a garage in the bristol area that could do it for me.
« Last Edit: 30 May 2010, 22:47:20 by r1zla »
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.01 seconds with 16 queries.