Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: Non Vaux camshaft sensors ??  (Read 1184 times)

0 Members and 1 Guest are viewing this topic.

Steveplumb

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Radstock, Near Bath
  • Posts: 86
    • View Profile
Non Vaux camshaft sensors ??
« on: 21 July 2010, 10:41:44 »
Are any non Vauxhall cam sensors considered reliable , or is it just not worth the savings ?? ie Siemins less than £20 ??  Thanks for any thoughts ....
Logged

Mr Skrunts

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Skruntie Land.
  • Posts: 25635
  • 3.O Elite Saloon with all the toys,
    • 2003 CD 2.2 Auto
    • View Profile
Re: Non Vaux camshaft sensors ??
« Reply #1 on: 21 July 2010, 11:08:57 »
From what I have read in my time on here you tend to read it's false economy to go cheap. as you have to replace later on.
Logged
Ask yourself :  " WHY do I believe in what I believe?"

Remember that my opinions expressed here are not representative of the opinions of other members on the OOF Forum.

davethediver

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Blackburn, Lancs.
  • Posts: 1376
    • View Profile
Re: Non Vaux camshaft sensors ??
« Reply #2 on: 21 July 2010, 13:19:11 »
Quote
Are any non Vauxhall cam sensors considered reliable , or is it just not worth the savings ?? ie Siemins less than £20 ??  Thanks for any thoughts ....

That would be a NO, go to vauxhall or better still get some with a trade card if you don't have one to go and spend the 50-60 english pounds and the job will be right.

Buy the ebay special and you may as well buy a few of them for WHEN they fail :y
Logged
“It is not necessary to understand things in order to argue about them.”
P.A. Caron de Beaumarchais

2woody

  • Omega Baron
  • *****
  • Offline Offline
  • Northumberland
  • Posts: 2374
    • View Profile
Re: Non Vaux camshaft sensors ??
« Reply #3 on: 21 July 2010, 13:59:34 »
Siemens probably the original sensor manufacturer anyway, so I'd trust it.

probably only one or two makes that I would trust, tho.
Logged

davethediver

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Blackburn, Lancs.
  • Posts: 1376
    • View Profile
Re: Non Vaux camshaft sensors ??
« Reply #4 on: 21 July 2010, 17:57:47 »
Siemens and bosch are the two main manufacturers of these sensors (indeed many of the electrical sensors on modern day cars) however £20 seems to be very cheap. Does it say that its a new part or a second hand one?

IME ive found that genuine from a dealer parts are worth the extra pennies.

Just my opinion :y
Logged
“It is not necessary to understand things in order to argue about them.”
P.A. Caron de Beaumarchais

Steveplumb

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Radstock, Near Bath
  • Posts: 86
    • View Profile
Re: Non Vaux camshaft sensors ??
« Reply #5 on: 21 July 2010, 19:01:25 »
On double checking the Siemens  sensor wasn't the correct one for  my car .... glad I checked !! yep really seems that 'genuine' is the recommendation.   Just that since I am not at all positive that replacing  the sensor  will cure the fault  it is a lot to pay out ...  if it does it will be money well spent . BTW this is the on going issue of auto box going into limp mode  still !!
Logged

tidla

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • solihull
  • Posts: 4097
    • View Profile
Re: Non Vaux camshaft sensors ??
« Reply #6 on: 21 July 2010, 19:12:56 »
cam sensors = autobox repair??
have you a thread open/link of your woes?
Logged

Steveplumb

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Radstock, Near Bath
  • Posts: 86
    • View Profile
Re: Non Vaux camshaft sensors ??
« Reply #7 on: 21 July 2010, 20:15:56 »
I also posted before this one but I cant locate it ..http://www.omegaowners.com/forum/YaBB.pl?num=1273866848/0#0 .
The How to replace cam sensor in the help section was posted by Vic who had same fault and it sorted the problem for him . Auto box selector  switch  was stripped and cleaned up as recommended but no luck .. the fault persists. fluid level also checked ..  faults showing are  P0727  P1781    P1650  P0340  P1700  P0700  P0568  P0335 ... So the cam sensor does show up !!
Logged

Steveplumb

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Radstock, Near Bath
  • Posts: 86
    • View Profile
Re: Non Vaux camshaft sensors ??
« Reply #8 on: 22 July 2010, 10:12:07 »
Any comments on the cluster of fault codes showing in relation to the limp mode issue much appreciated ...
Logged

davethediver

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Blackburn, Lancs.
  • Posts: 1376
    • View Profile
Re: Non Vaux camshaft sensors ??
« Reply #9 on: 22 July 2010, 10:56:27 »
P0727 No Idea
P1781 No Idea
P1650 Service Light Voltage High
p0340 Camshaft Position Sensor Circuit No Signal
P1700 No Idea
P0700 EOBD Error stored by Transmission Control (TC) Modu
p0568 Cruise Control Set Signal Circuit High Input
p0335 Crankshaft Sensor Open Circuit   

Not unusual when you have a failed cam sensor for it to throw up all sorts of daft codes.

When mine went it was exactly the same and i too thought worse and was expecting to put a new box in. Changed the cam sensor and as if by magic up and running again and the other fault codes just disappered. Well the did after a kind member from bolton erased them ;D ;D
Logged
“It is not necessary to understand things in order to argue about them.”
P.A. Caron de Beaumarchais

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: Non Vaux camshaft sensors ??
« Reply #10 on: 22 July 2010, 11:11:07 »
P0727---Engine Speed Circuit No Signal
P1781---Engine Torque Signal Circuit
P1700---Transmission Control Module (TCM) Requested MIL Illumination
As stated, codes are more than likely a result of intermittent cam sensor

Edit; Are any or all of these codes "stored" or "present". :question
« Last Edit: 22 July 2010, 11:12:19 by RobG »
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

Steveplumb

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Radstock, Near Bath
  • Posts: 86
    • View Profile
Re: Non Vaux camshaft sensors ??
« Reply #11 on: 22 July 2010, 16:24:07 »
Sorry not sure to be honest if they are stored or present  :-/
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: Non Vaux camshaft sensors ??
« Reply #12 on: 22 July 2010, 16:30:22 »
Can you lay your hands on a code reader. I`d wager some of them are "old stored"
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

Entwood

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • North Wiltshire
  • Posts: 19566
  • My Old 3.2 V6 Elite (LPG)
    • Audi A6 Allroad 3.0 DTI
    • View Profile
Re: Non Vaux camshaft sensors ??
« Reply #13 on: 22 July 2010, 17:08:17 »
It's a bit of a trek but I have a code reader, just outside of Swindon, if I can help in any way ???

:)
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: Non Vaux camshaft sensors ??
« Reply #14 on: 22 July 2010, 18:52:47 »
Quote
It's a bit of a trek but I have a code reader, just outside of Swindon, if I can help in any way ???

:)
I`m a bit closer in Bristol. (BS10) :y
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted
Pages: [1]   Go Up
« previous next »
 

Page created in 0.018 seconds with 17 queries.