Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Boditza]

some kids tryed to remove one of mine and broke the housing but the noozles are still there. i want to replace it but i don't know how to take the old one out. can someone post some pics here please?

[TheBoy]

Bumper off, then you can see the clip that holds the nozzles in place

[Boditza]

Bumper off, then you can see the clip that holds the nozzles in place

pffff.. i was afraid of that
hoped there is a easyer way

[feeutfo]

Bumper off, then you can see the clip that holds the nozzles in place

pffff.. i was afraid of that
hoped there is a easyer way

Bumper off is easy enough, only fiddly bit is the trim under the headlight with a tab that pushes out from the back, the rest are screws and push through pegs in the plastic clips... May not need to undo the clips under/behind the skirt, just undonthe sides and lean it forward.

What do kids want with it anyway...?  :-/

[TheBoy]

Bumper off, then you can see the clip that holds the nozzles in place

pffff.. i was afraid of that
hoped there is a easyer way

It is easy

[Boditza]

Bumper off, then you can see the clip that holds the nozzles in place

pffff.. i was afraid of that
hoped there is a easyer way

Bumper off is easy enough, only fiddly bit is the trim under the headlight with a tab that pushes out from the back, the rest are screws and push through pegs in the plastic clips... May not need to undo the clips under/behind the skirt, just undonthe sides and lean it forward.

What do kids want with it anyway...?  :-/

i'm just guessing they were kids because they were playing near the car when i left it and when i came back it was smashed and no  kid around.. anyway i will try to remove it myself and see what comes out of it