Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: camber 2.5 omega  (Read 736 times)

0 Members and 1 Guest are viewing this topic.

david2310

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • croydon
  • Posts: 11
    • View Profile
camber 2.5 omega
« on: 19 October 2010, 19:35:10 »
hi does anybody no the camber setting for 2000 omega 2.5 cdx as i changed my shocks and taken it into kwikfit to check them, as they was closing i didnt expect them todo anything but check them they said n/s 1.2 and o/s 2.0 does this mean anything to anybody? and what should they be help please thank you
Logged

Kaycee

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Doncaster
  • Posts: 380
    • View Profile
Re: camber 2.5 omega
« Reply #1 on: 19 October 2010, 19:55:49 »
Usual qwiqfit
it should be -1.10 thats negative camber yours is positive i would suspect it would be virtually undrivable with that setting if it is indeed positive camber even if it was negative it would be pulling badly to oneside
Rob
Logged
There is a tide in the affairs of man if taken at the flood will lead on to greater things

david2310

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • croydon
  • Posts: 11
    • View Profile
Re: camber 2.5 omega
« Reply #2 on: 19 October 2010, 20:00:46 »
sorry i missed out the negitive it should of read -1.2 n/s and -2.0 o/f sorry about that and i have 16inch rims dont know if that makes a difference
« Last Edit: 19 October 2010, 20:02:00 by david2310 »
Logged

wheels-inmotion

  • Junior Member
  • **
  • Offline Offline
  • 0
  • Posts: 200
    • View Profile
Re: camber 2.5 omega
« Reply #3 on: 20 October 2010, 09:15:46 »
-1.2 is ok but the -2.0 is way to deep.
Logged

2woody

  • Omega Baron
  • *****
  • Offline Offline
  • Northumberland
  • Posts: 2374
    • View Profile
Re: camber 2.5 omega
« Reply #4 on: 20 October 2010, 10:37:28 »
I run -2.0 on one car, BUT it's a track car, and I'm really only after camber-thrust at the expense of tyre wear.

factory settings best for road use.
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.015 seconds with 17 queries.