Topic: Where is the heater motor fitted?? (Read 755 times)

Vamps · « **on:** 30 October 2010, 01:02:42 »

As above, where is it and how do I access it?

feeutfo · « **Reply #1 on:** 30 October 2010, 01:48:57 »

Glove box out, air bag out, and a load of other stuff I believe and it's in there somewhere, where's TB's pic of a stripped back dash...?

Welung666 · « **Reply #2 on:** 30 October 2010, 10:28:35 »

Has yours gone Mike? I'm about to start stripping a dash out now on this breaker if you need one. I can take pics to if you need me to?

dbug · « **Reply #3 on:** 30 October 2010, 13:56:50 »

Glovebox out mate - no need to remove or disconnect air bag though.
Need to remove cable tray (cut off all the tape - unclips one end then pull out). Blower motor 3 torx screws and unplug power then wriggle out. As Hayes refitting reverse of removal - one of the torx screws is a barsteward though!! When refitting cable tray tie wrap cabling to it.

Good luck Mike

News:

Author Topic: Where is the heater motor fitted?? (Read 755 times)

Vamps

Where is the heater motor fitted??

feeutfo

Re: Where is the heater motor fitted??

Welung666

Re: Where is the heater motor fitted??

dbug

Re: Where is the heater motor fitted??