Topic: help !! (Read 680 times)

gbaker · « **on:** 04 January 2011, 15:18:12 »

Hi gang this has most prob been asked before but i have a 2.2 2001 auto wont go into drive only drives though gears manually selected revs up and down when gears selected have had loads of people say its the cam sensors /ecu engine and gearbox and the bit on the side of gearbox held on with 10mm bolts but have changed this and still the same but dont want to go any further untill sure so any help would be greatful sorry if its been talked about before but stressng know lol

mrgreen · « **Reply #1 on:** 04 January 2011, 15:25:32 »

does it not select drive at all?

gbaker · « **Reply #2 on:** 04 January 2011, 15:28:07 »

hi yes it selects all but when you put it in drive it goes in to 4th and stays there !! and revs up and down

mrgreen · « **Reply #3 on:** 04 January 2011, 15:31:02 »

i would have it checked for codes it does point to a cam sensor

gbaker · « **Reply #4 on:** 04 January 2011, 15:35:06 »

thanks Mr Green ive booked it in for next week at the local garage was hoping to solve it before lol oh forgot to mention its had a cmplete rebuild of head ect after cam belt snapped if that helps ? blooming cars lol

Welung666 · « **Reply #5 on:** 04 January 2011, 16:26:16 »

Where are you GB? Maybe someone local to you has a code reader that could help out

gbaker · « **Reply #6 on:** 04 January 2011, 16:38:54 »

Hi im in canterbury kent its doning me head in and the wife well lol

Welung666 · « **Reply #7 on:** 04 January 2011, 16:42:13 »

There are quite a few Kent members, hopefully one will be along who has a code reader

News:

Author Topic: help !! (Read 680 times)

gbaker

help !!

mrgreen

Re: help !!

gbaker

Re: help !!

mrgreen

Re: help !!

gbaker

Re: help !!

Welung666

Re: help !!

gbaker

Re: help !!

Welung666

Re: help !!