Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: Spanner light on instrument cluster  (Read 726 times)

0 Members and 1 Guest are viewing this topic.

Graceland

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Wakefield
  • Posts: 20
    • View Profile
Spanner light on instrument cluster
« on: 06 January 2011, 20:27:53 »
Hiya all :)

I've had a search on here to try and find the answer but can't seem to find it :(

Does the facelift 2.2 DTi have a spanner light on the dashboard instrument cluster (the one that is used on other engines to read the ecu fault codes when the throttle is pressed and held with the engine not running) ?

The reason I ask is that obviously the cluster in my car has that cutout/picture but doesn't illuminate when you turn the ignition on and the vehicle self test is performed.

If it is supposed to have it then I suspenct the bulb may of been removed or has died.

Cheers :)
« Last Edit: 06 January 2011, 20:32:16 by Graceland »
Logged

Welung666

  • Guest
Re: Spanner light on instrument cluster
« Reply #1 on: 06 January 2011, 21:39:59 »
Neither of the 2.2 engines (petrol a diesel) can be paperclipped or pedal tricked. They need a code reader.

Most likely the bulb has gone or the previous owner has removed it to hide a fault.

HTH :y
Logged

Graceland

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Wakefield
  • Posts: 20
    • View Profile
Re: Spanner light on instrument cluster
« Reply #2 on: 07 January 2011, 09:11:25 »
Cheers - I have a code reader that works with the car but was just curious asto the whereabouts of the bulb :)
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.011 seconds with 16 queries.