Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[P6UL K]

1. Can anyone advise on what sort of LSD the TVP Omegas had from the factory?

When i'm making turns or if the car is under load there's what i can only describe as a 'klonk' and vibration coming from the rear diff.... its almost like being in a car that has a wealded diff.  Is this due to the type of diff fitted or am i facing some £££ issues 

 2. Anyone local to me have the Vx computer thing?  Is it called 'Tech 2'?  Need my cruise control turned on.

Thanking you!

[Lazydocker]

Diff doesn't sound right :-/ I assume you've checked the oil?

Nearest Tech 2 to you is Kevin Wood near Alton

[Jimbob]

a lot didnt have LSD as standard, I can check yours if you pm me your reg.  Shouldnt be making that sort of noise, hopefully just low oil, but could be fubar. 

Nearest 'forum' tech2 is in Alton, Hampshire, or then Brackley, Northampton

[aaronjb]

When i'm making turns or if the car is under load there's what i can only describe as a 'klonk' and vibration coming from the rear diff.... its almost like being in a car that has a wealded diff.  Is this due to the type of diff fitted or am i facing some £££ issues 

If it has an LSD and it's a clutch type (which, IIRC, the Omega was) then it could easily be a clutch diff with the wrong oil (or no friction modifiers in).. that'd cause it to lock up inappropriately.

[Kevin Wood]

Yep, sounds like a LSD with knackered oil.

An oil change with LS additive or a proper LSD oil would be my first recommendation.

Happy to enable the cruise whenever convenient. Why not pop over to the "Cam Belt Party" that Gaffers is organising at the end of February?

It's probably worth getting hold of a cruise stalk beforehand so we can double check the functionality.

Kevin

[P6UL K]

a lot didnt have LSD as standard, I can check yours if you pm me your reg.  Shouldnt be making that sort of noise, hopefully just low oil, but could be fubar. 

Nearest 'forum' tech2 is in Alton, Hampshire, or then Brackley, Northampton

I realise the standard ones didn't, but mine isn't standard is it   And the No11 it leaves are proof enough lol

Alton?!  Blimey thats miles away! No-one in Kent at all? I'll see if i can find anyone nearer otherwise i'll be in touch

But i have PM'd you my registration to be sure 

[P6UL K]

Yep, sounds like a LSD with knackered oil.

An oil change with LS additive or a proper LSD oil would be my first recommendation.

Happy to enable the cruise whenever convenient. Why not pop over to the "Cam Belt Party" that Gaffers is organising at the end of February?

It's probably worth getting hold of a cruise stalk beforehand so we can double check the functionality.

Kevin

Hi Kevin,

I already have the correct stalk which i'm fitting on Friday.

Cambelt party!?  Are you being serious? Hmmmm I spose i could get my cam belt, tensioners and water pump done at the same time then 

Can you or anyone recommend the correct oil to use in the LSD so i can get it serviced? 

Cheers.

[RobG]

http://www.opieoils.co.uk/c-970-limited-slip-diff.aspx
Sticky at the top of parts section re; Opie

[Jimbob]

have checked and it left the factory with a 3.7 LSD 

[aaronjb]

Alright, if Paul comes to the Hampshire meet, I'll need you all to distract him while I swap his diff with mine. Ok?

 

[Kevin Wood]

Hi Kevin,

I already have the correct stalk which i'm fitting on Friday.

Cambelt party!?  Are you being serious? Hmmmm I spose i could get my cam belt, tensioners and water pump done at the same time then 

Can you or anyone recommend the correct oil to use in the LSD so i can get it serviced? 

Cheers.

Just thought the journey would be more worthwhile with a bit of a social event at the end of it rather than just me.

BOA90LS is the normal recommendation for LSD oil IIRC. Haven't got one myself.

Kevin

[P6UL K]

Alright, if Paul comes to the Hampshire meet, I'll need you all to distract him while I swap his diff with mine. Ok?

 

ha ha!! I'll be keeping a beady eye on you then! 

[P6UL K]

Hi Kevin,

I already have the correct stalk which i'm fitting on Friday.

Cambelt party!?  Are you being serious? Hmmmm I spose i could get my cam belt, tensioners and water pump done at the same time then 

Can you or anyone recommend the correct oil to use in the LSD so i can get it serviced? 

Cheers.

Just thought the journey would be more worthwhile with a bit of a social event at the end of it rather than just me.

BOA90LS is the normal recommendation for LSD oil IIRC. Haven't got one myself.

Kevin

True, true... I'll go on the hunt for the thread regarding the cam belt party then

Oil ordered and winging its way to me from the Oilman aka Opie  8-)