Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: Vacuum hoses  (Read 1150 times)

0 Members and 1 Guest are viewing this topic.

zirax

  • Intermediate Member
  • ***
  • Offline Offline
  • 0
  • Posts: 256
    • View Profile
Vacuum hoses
« on: 13 January 2011, 22:40:48 »
I've had a look at my Omega and I think there is a vacuum pipe missing. It is the one going from the T-piece of the front multi-ram to the vacuum res at the bottom of the inlet ducts. Does anyone know a part number for this?
Logged
Dr Richard Stephens:- "I would advise people, if they hurt themselves, to swear."

freecall666

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • looking over your shoulder
  • Posts: 1451
  • fun for all, get with the program
    • 2.0l sweat tank on wheels
    • View Profile
Re: Vacuum hoses
« Reply #1 on: 14 January 2011, 08:06:07 »
from what seen on here it gose no were just sits at the back of the engine but maybe wrong but thats what seen in old posts.
Logged
Solar charger fitted.
If not Broke dont fix it..

Jimbob

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Chester / Flintshire
  • Posts: 24523
  • I like traffic lights, but only when they're green
    • E250 Est / Golf GTI
    • View Profile
Re: Vacuum hoses
« Reply #2 on: 14 January 2011, 08:17:38 »
ignore the prat above, he is refering to a gearbox breather at the back of the engine, not the multiram system at the front  :y

Dont think vacuum pipes have part numbers, are just cut off the roll in effect, beleive a decent factors should have it.
Logged

Welung666

  • Guest
Re: Vacuum hoses
« Reply #3 on: 14 January 2011, 08:34:17 »
Is this the one that comes off the bottom of the front of the plenum and runs up underneath the plenum to the rear of the engine?
Logged

kcl

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Finland
  • Posts: 1224
    • Volvo V60 D4 -14
    • View Profile
Re: Vacuum hoses
« Reply #4 on: 14 January 2011, 10:46:48 »
Does anyone have dimensions for these hoses? 3mm/4mm or what size are they?

The one under the front of plenum seems to be quite loose on many omegas and does not affect that much... I have no noticed any difference when it has come off...
Logged

feeutfo

  • Guest
Re: Vacuum hoses
« Reply #5 on: 14 January 2011, 10:51:50 »
Quote
I've had a look at my Omega and I think there is a vacuum pipe missing. It is the one going from the T-piece of the front multi-ram to the vacuum res at the bottom of the inlet ducts. Does anyone know a part number for this?
Any body breaking omegas will have a few miles of the stuff, certainly the guy in Heathrow was giving it away, with other purchases.

Maybe a wanted add here. ?

But is it worth posting a Picture so we can be sure?
Logged

Entwood

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • North Wiltshire
  • Posts: 19566
  • My Old 3.2 V6 Elite (LPG)
    • Audi A6 Allroad 3.0 DTI
    • View Profile
Re: Vacuum hoses
« Reply #6 on: 14 January 2011, 10:51:57 »
Logged

mahony

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • london
  • Posts: 250
    • omega elite 3.0
    • View Profile
Re: Vacuum hoses
« Reply #7 on: 14 January 2011, 12:19:49 »
i replaced the rubber vacuum hose  next to the servo  a few weeks back, 4mm fitted perfectly  :y
« Last Edit: 14 January 2011, 12:21:06 by mahony »
Logged

Welung666

  • Guest
Re: Vacuum hoses
« Reply #8 on: 14 January 2011, 18:44:21 »
I've got a load here if you need any, I also have 90 degree and traight through rubber connectors :y
Logged

zirax

  • Intermediate Member
  • ***
  • Offline Offline
  • 0
  • Posts: 256
    • View Profile
Re: Vacuum hoses
« Reply #9 on: 14 January 2011, 20:43:04 »
Quote
Does this help in any way ???

http://www.omegaowners.com/forum/YaBB.pl?num=1152565204

:)
Yep, it is the piece that goes from the Res to the T-piece behind the inlet hose.

Quote
I've got a load here if you need any, I also have 90 degree and traight through rubber connectors :y

I may take you up on that offer! I will have a proper look under the bonnet tomorrow and check that is the only piece I need.

edit: A picture does say a 1000 words so I will sort a pic out tomorrow as well
« Last Edit: 14 January 2011, 20:44:30 by zirax »
Logged
Dr Richard Stephens:- "I would advise people, if they hurt themselves, to swear."
Pages: [1]   Go Up
« previous next »
 

Page created in 0.013 seconds with 17 queries.