Topic: Front tracking what was WIM value? (Read 789 times)

Martin_1962 · « **on:** 17 January 2011, 15:08:26 »

Possible dodgy track rod end so need the toe value if it gets changed during MOT.

Thanks

Martin

Kevin Wood · « **Reply #1 on:** 17 January 2011, 16:14:37 »

Just a little toe in. From memory -10' +/- 10'.

Kevin

feeutfo · « **Reply #2 on:** 17 January 2011, 18:19:45 »

Defo minus 0.10 mins, thought it was +- 0.05 mins. But yes close enough.

VXL V6 · « **Reply #3 on:** 17 January 2011, 18:42:00 »

For the small cost difference I would buy the whole track assembly for that side, not just the rod end. I had just the track rod end fitted on one side of the estate and it turned out to be a pig due to a crushed collar.

If you buy the whole assembly (Buypartsby or similar) you can place the new unit next to the old unit and get the initial setup pretty close.

Liam · « **Reply #4 on:** 18 January 2011, 23:04:14 »

Toe-in is positive, so you want 0°05' +/-0°05' either side (or 0°10' +/-0°10' total toe). Was at WIM today.

Martin_1962 · « **Reply #5 on:** 19 January 2011, 11:52:09 »

Passed on it anyway.

Need to replace a rubber sometime.

Trying to avoid a trip to Chesham as I have been twice in the last 2 years

News:

Author Topic: Front tracking what was WIM value? (Read 789 times)

Martin_1962

Front tracking what was WIM value?

Kevin Wood

Re: Front tracking what was WIM value?

feeutfo

Re: Front tracking what was WIM value?

VXL V6

Re: Front tracking what was WIM value?

Liam

Re: Front tracking what was WIM value?

Martin_1962

Re: Front tracking what was WIM value?